Subtotal:
    does not include shipping and tax

    RWS Muzzlebrake, Fits RWS 34, 34P, 45 & 350 Magnum Rifles and Beeman R-Series Rifles, 5.25" Long

    by RWS overview
    RWS Muzzlebrake, Fits RWS 34, 34P, 45 & 350 Magnum Rifles and Beeman R-Series Rifles, 5.25" Long

    RWS Muzzlebrake, Fits RWS 34, 34P, 45 & 350 Magnum Rifles and Beeman R-Series Rifles, 5.25" Long by RWSinformation

    Item DescriptionQuantityItem Code
    • Muzzlebrake
    • 5.25" long
    • .630" inside diameter
    • Fits RWS 34, 34P, 45 and 350 Magnum rifles and Beeman R-series rifles
    • Has 2 set screws
    • Front sights on the guns must be removed to attach muzzlebrake

    Installation instructions:
    1. The front sight is removed, the muzzlebrake sleeves over the end of the barrel and the brake is then secured with the set screws.
    2. You will probably have to file down the grooved area where the front sight attaches for the brake to slide over the barrel.
    3. When the factory grooves the top (muzzle end) of the barrel for sight installation, there will be two raised areas that can cause the muzzlebrake to bind if you don’t file them down.
    4. You can always reattach your front sight, as only a small amount of the grooves are removed.

    In stock

    UX-2302652 [PY-A-2965]
    Add To Wishlist

    RWS Muzzlebrake, Fits RWS 34, 34P, 45 & 350 Magnum Rifles and Beeman R-Series Rifles, 5.25" Long by RWSassociated tags

    Search Products Tagged with         See most popular tags
    Add your tag

    RWS Muzzlebrake, Fits RWS 34, 34P, 45 & 350 Magnum Rifles and Beeman R-Series Rifles, 5.25" Long by RWSreviews summary

    Average Customer Review

    4(11 reviews)
    5 star:4 star:3 star:2 star:1 star:
    (3 votes)(4 votes)(2 votes)(2 votes)
    RWS Muzzlebrake, Fits RWS 34, 34P, 45 & 350 Magnum Rifles and Beeman R-Series Rifles, 5.25 inch Long
    Create an online reviewand share your thoughts with other customers Show Other Reviews

    Overall rating:2 2.0

    Value for money:2 2.0

    By Dj from USA on 2012-01-18 20:06:31
    See all my reviews
     Was this review helpful?
    00 ratings
    Things I liked:It dressed up the end of the barrel on my daisy mod 120.
    What others should know:It is NOT the one on the rws guns from the factory. I has a pro compact and the break on it is huge compared to this one. The end of mine was screwed in crooked so its not flush all the way around with the bady of the break and there was a slight amount of rust on one of the grub screws. I tried to unscrew the end to fix it and grrrd up the edge so its not going back now. Its not bad just not the factory break i thought it was.

    Overall rating:5 5.0

    Value for money:3 3.0

    By Ray from USA on 2011-12-14 13:44:03
    See all my reviews
     Was this review helpful?
    00 ratings
    Things I liked:The look of my rifle after putting the brake on. It did seem to balance out the rifle a little bit.
    Things I would have changed:Seems a bit overpriced for what it is.
    What others should know:I am strictly shooting through scoped rifles, because my vision with open sights isn't that good. Didn't like seeing/feeling the grooves when used. Much happier with the look and feel.

    Overall rating:3 3.0

    Value for money:2 2.0

    By Jake from USA on 2011-08-29 22:58:54
    See all my reviews
     Was this review helpful?
    00 ratings
    Things I liked:Steel, it is steel. Shape, weight, threaded end cap. Did seem to reduce barrel vibration on an HW90/RX-2.
    Things I would have changed:Maybe I got a one off one, but the finished machining was marginal at best. I would like to see better machining with bluing instead of paint or powdercoat. Rating value for money is tough because it's fairly cheap, but also finished poorly.
    What others should know:I put this on an older RX-2, had to machine off the dovetails, but the diameter is just right for Weihrauch rifles. Which means it should "fit all R series beeman rifles except R7". ID was ~.630. The set screws are too long, and poor quality. I ended up welding the set screw holes shut, re machining the surface and applying an epoxy based bake on paint; then JBwelding it to the barrel. Happy with it now, especially considering the crow magnum style brake is currently unavailable.
    Create an online review and share your thoughts with other customers  Show Other Reviews

    4(11 reviews)

    1-year limited warranty

    MSRP:$40.00
    You save: (36%)-$14.05
    Sale Price:$25.95
    Estimate Shipping
    Zip Code:
    Country:
    Total Price:$25.95
    Add to Cart

    FREE Continental USA Ground shipping on orders $150 and up (cannot be combined with coupons)

    Want it delivered 02-13-2012
    Order it in the next 6 h and 7 min, and choose Next Day Air Morning at checkout. Details

    Add to Compare list

    Other products by Umarex > RWS

    Company policy / FAQ