Roll over image to zoom in
Create an online review and share your thoughts with other customers
Things I liked: The scope rail on the BAIKAL IZH61 is extremly short. This mount allows the rail to be held by the front two screws and hang off the back still giving a very solid mount and grip. I've done this on my wife and kids IZh to great effect.
Things I would have changed: nothing
What others should know: Some single piece wont work with short bug buster scopes not enuff room between the bells
Things I liked: I really like this mount. I'm using it on my Beeman RS2 which has a pretty stiff recoil and I haven't had any slipping issues whatsoever. Great mount for the money.
Things I would have changed: Nothing.
Things I liked: It fits the gun and scope well.
Things I would have changed: I would add an additional two screws between the existing three plus an additional two screws going down thru the top and emerging thru to the Vee cutout so when you tighten them they would exert force on the gun and help to prevent creep.
What others should know: I bought this mount to replace the scope mount that came with the Tech Force Contender Series Model 89 I purchesed. I had to replace the origional mount because I could not keep the scope from creeping backwards. I also used a universal recoil stop block. It also creeped. My new mount also creeps. But a lot less. I'm going to have a machinest drill and tap 2 more screw holes between the existing screws. I hope this solves the problem.My next step will be to drill and tap the gun just behind the mount so I can install a fixed screw using the head as a recoil stop.