does not include shipping and tax
1-year limited warranty
List Price $21.00 Save $6.05 (28%)
Want it delivered 12-01-2014?
Order it in the next 0 hr and 37 min and choose Next Day Air Morning at checkout. Details
Average Customer Review5.0 (89 reviews)
Create an online reviewand share your thoughts with other customers
Things I liked:Used in the Beretta 92fs. Easy to load, load into gun and unload from gun. I get 72 shots, ( 9 magazines ), at which point a 73rd. did not completly exit the magazine.Now I stop at 70 despite some Co2 still being left in the cartridge. First 1 or 2 shots are a little high and the last few a little low as you would expect.
Things I would have changed:Nothing from what I can tell. Close to 1000 shots thus far from 8 mags. Metal appears to be "sintered", a process of metal powder, pressure and heat to create a solid mass.
What others should know:I borrowed a set of digital calipers from work and checked the inlet sides of 3 mags and also the exit sides, (I.D. of pellet chambers). Inlet side ranged from .179 - .1805. The exit side was a very consistant .176 - .177, revealing a "funnel" effect. Benjamin hollow points fit well. Crossman Ultra Mag. 10.5gr. seem to fit looser with a couple actually dropping through. I was pressing the pellets flush to the front of the mag. and now have switched to flush to rear. Anyone got an opinion on that??? I had a couple of Crossmans pressed flush to front on the back of a writing pad and they must have come a little past flush. The gun would start to advance the mag. but then not lock into the cocked position. Removing the mag. revealed a pellet with a slight knick from the back end of the barrel. Thats why I switched to pressing flush to rear. I also tried pressing the pellets completly through and then reloaded back into the same chamber, effetivly sizing the pellets. Anyone else try this??
Things I liked:The fact that they worked flawlessly and are easy to load and re-load.
Things I would have changed:None that I can see.
What others should know:Get'em while they last.
Things I liked:All metal, consistent quality.
Things I would have changed:Price - a little on the expensive side.
What others should know:It's nice having lots of these around already loaded to max out on the fun!
Compatible with Walther/Colt/Beretta/Magnum Research/H&K/S&W 8-rd Airgun Magazines, 3ct