does not include shipping and tax
1-year limited warranty
List Price $21.00 Save $6.05 (28%)
Want it delivered 12-23-2014?
Order it in the next 16 hr and 16 min and choose Next Day Air Morning at checkout. Details
Average Customer Review5.0 (89 reviews)
Create an online reviewand share your thoughts with other customers
Things I liked:Used in the Beretta 92fs. Easy to load, load into gun and unload from gun. I get 72 shots, ( 9 magazines ), at which point a 73rd. did not completly exit the magazine.Now I stop at 70 despite some Co2 still being left in the cartridge. First 1 or 2 shots are a little high and the last few a little low as you would expect.
Things I would have changed:Nothing from what I can tell. Close to 1000 shots thus far from 8 mags. Metal appears to be "sintered", a process of metal powder, pressure and heat to create a solid mass.
What others should know:I borrowed a set of digital calipers from work and checked the inlet sides of 3 mags and also the exit sides, (I.D. of pellet chambers). Inlet side ranged from .179 - .1805. The exit side was a very consistant .176 - .177, revealing a "funnel" effect. Benjamin hollow points fit well. Crossman Ultra Mag. 10.5gr. seem to fit looser with a couple actually dropping through. I was pressing the pellets flush to the front of the mag. and now have switched to flush to rear. Anyone got an opinion on that??? I had a couple of Crossmans pressed flush to front on the back of a writing pad and they must have come a little past flush. The gun would start to advance the mag. but then not lock into the cocked position. Removing the mag. revealed a pellet with a slight knick from the back end of the barrel. Thats why I switched to pressing flush to rear. I also tried pressing the pellets completly through and then reloaded back into the same chamber, effetivly sizing the pellets. Anyone else try this??
Things I liked:The fact that they worked flawlessly and are easy to load and re-load.
Things I would have changed:None that I can see.
What others should know:Get'em while they last.
Things I liked:All metal, consistent quality.
Things I would have changed:Price - a little on the expensive side.
What others should know:It's nice having lots of these around already loaded to max out on the fun!
Compatible with Walther/Colt/Beretta/Magnum Research/H&K/S&W 8-rd Airgun Magazines, 3ct