Roll over image to zoom in
Beeman RX2 Elite Series Air Rifle Combo
A gas piston has many advantages over a metal mainspring...
The Beeman RX2 has a well-earned reputation for accuracy, fit and finish. Made in Germany, this air rifle will become an heirloom. Shoot it, enjoy it and pass it down to your kids and grandkids. Derive decades of shooting pleasure...plinking, pest elimination, shooting bullseye targets and more. No matter what you ask of this air rifle, it'll perform flawlessly!
Each Beeman RX2 Combo comes with a mounted UTG 4-16x40 AO rifle scope!
|Max Velocity||950 fps|
|Cocking Effort||46 lbs.|
|Trigger Pull||2.0 lbs|
Create an online review and share your thoughts with other customers
Things I liked: Dead on accuracy. Has a nice kick to it. Stylish
Things I would have changed: Lighten it us some, Include some Loctite due to the barrel screws coming loose and causing the accuracy to fade.
What others should know: My first two scopes failed, and the third is a charm. Bushnell did a great job replacing these scopes at no cost to me. Thanks. You will have to re-sight the scope when changing to a different pellet.
Things I liked: I like the accurate video description of the rifle's characteristics, especially the solution to the inherent droop problems with all high-performance Beeman's that I have used. I cannot understand why Beeman (or Theoben) has never effectively addressed that particular issue in their literature.
Things I would have changed: I own both an RX-1 and an RX-2 (prior editions), and scope movement has been the greatest single problem for me in using these guns. Droop correction, recoil displacement of the scope in the mounting rings, and MOST OF ALL, recoil displacement of the scope/mounts on the receiver have been continual chronic problems for me with these guns. I still love them, however, and long for the day when I finally resolve these issues.
What others should know: Although the modified droop-compensating scope mount is an essential item, I have still found it necessary to use paper shims (.003") to get my scope vertically centered within its adjustment range, and to use LocTite adhesive to eliminate recoil "creep" of the scope inside the rings. As of now I have not found a permanent solution to recoil "creep" on the receiver grooves. These air-piston guns have an extemely sharp recoil waveform which tends to move the scope/mount assembly with surprising force.
Things I liked: Quality of rifle
Things I would have changed: Easier to cock
What others should know: Scope came mounted on gun. Don't know if rings were were bad or defective scope. Windage is virtually uncorrectable. So, accuracy was downgraded not from the rifle but the rifle/scope rings/scope combo.
Just bought the gun (.25), will this scope that comes with it stand up to the recoil? I heard this gun eats scopes. Should I switch out gun rings?
|Max Velocity||950 fps|
This item is not eligible for coupon discounts