does not include shipping and tax
0.22" (5.5mm), 860.0 fps, Laminated, Right, Brown
Scope is mounted! .22 cal. has power to spare. Take raccoons, nutria, pest birds, rabbits, woodchucks & more!
Meets Pyramyd Air's exacting specifications!
Incl. a FREE 10-for-$10 test!
Lifetime limited warranty
List Price $1,199.95 Save $170.00 (14%)
Want it delivered 03-18-2014?
Order it in the next 10 hr and 55 min and choose Next Day Air Morning at checkout.
Note: Same Day Shipping Exempt. Details
Coupons not accepted for this item today
Things I liked:Dead on accuracy. Has a nice kick to it. Stylish
Things I would have changed:Lighten it us some, Include some Loctite due to the barrel screws coming loose and causing the accuracy to fade.
What others should know:My first two scopes failed, and the third is a charm. Bushnell did a great job replacing these scopes at no cost to me. Thanks. You will have to re-sight the scope when changing to a different pellet.
Things I liked:I like the accurate video description of the rifle's characteristics, especially the solution to the inherent droop problems with all high-performance Beeman's that I have used. I cannot understand why Beeman (or Theoben) has never effectively addressed that particular issue in their literature.
Things I would have changed:I own both an RX-1 and an RX-2 (prior editions), and scope movement has been the greatest single problem for me in using these guns. Droop correction, recoil displacement of the scope in the mounting rings, and MOST OF ALL, recoil displacement of the scope/mounts on the receiver have been continual chronic problems for me with these guns. I still love them, however, and long for the day when I finally resolve these issues.
What others should know:Although the modified droop-compensating scope mount is an essential item, I have still found it necessary to use paper shims (.003") to get my scope vertically centered within its adjustment range, and to use LocTite adhesive to eliminate recoil "creep" of the scope inside the rings. As of now I have not found a permanent solution to recoil "creep" on the receiver grooves. These air-piston guns have an extemely sharp recoil waveform which tends to move the scope/mount assembly with surprising force.
Things I liked:Quality of rifle
Things I would have changed:Easier to cock
What others should know:Scope came mounted on gun. Don't know if rings were were bad or defective scope. Windage is virtually uncorrectable. So, accuracy was downgraded not from the rifle but the rifle/scope rings/scope combo.