does not include shipping and tax
1-year limited warranty
Create an online reviewand share your thoughts with other customers
Things I liked:It has a great look to it and has lots of power. I sent mine off to Mac1airguns and had the o'rings and valve's modded for a tighter seal. It now shoots up to 1050ft/sec and at the full power setting with only 2500 lbs. it will shoot multiple times thru a 2x6 at 20ft. Its also not as loud now as the seals are tighter. It could easily take out a mountain lion if the need arose. It really works GOOD!
Things I would have changed:The rear sight on my gun is too tight, and was difficult to adjust. I actually had to remove the screws and lightly tap with the plastic end of a screwdriver to loosen it up enough to adjust. The cheek peice is alittle high, but is not enough to affect the ability to sight on a target.
What others should know:The single shot side of the shuttle will need to be drilled out to size if you intend to shoot multiple pellet sizes without changing the pellet sizer each time. Pyramyd Air will redrill it for you at no charge, if you send in just the shuttle, or the whole gun. This also applies to the .25cal. career II. Its a manufacturers defect.
Things I liked:The lever action is fast and will allow for a quick follow-up shot. The power is devastating. The overall quality isnt on par with some of the hi-end Euromade rifles but its real close. "0" recoil and a the stock trigger isnt bad at all.
Things I would have changed:The sights and or the stock. Most of the shooters I have let hold and fire the rifle complain of the cheek rest on the butt to be too high or the sights too low. I corrected this with a scope. However I think a good pair of sights is the way to go on a fast handling lever action.
What others should know:This thing is LOUD! I would say the note of this rifle is comparable to rimfires and small centerfire rifles. I have found that they make a silencer available in Korea but dont offer them here.