Lifetime limited warranty
List Price $529.95 Save $60.00 (11%)
Only 3 left in stock
Buy and Earn 470 Bullseye Bucks!
Contact Customer Service:
Call: 888-262-4867 (GUNS)
|Max Velocity||1100 fps|
|Cocking Effort||39 lbs.|
|Front Sight||Blade & Ramp|
|Rear Sight||Adjustable for windage & elevation|
|Suggested for||Small game hunting/plinking|
|Trigger Pull||3.3 lbs|
Create an online review and share your thoughts with other customers
Things I liked: Great looking gun. Very accurate right out of the box. Mine likes CPHP pellets but shoots other pellets very good also.
Things I would have changed: Include a weaver scope mount with the rifle. Other than that nothing.
What others should know: Gun shoots very good out of the box and after about 100-200 pellets rifle becomes a tack driver all the way to 50 yards, 70 yards groups under an inch. I have many air rifles and this is my favorite. I have some of the most hold sensitive air rifles out there and this one is NOT hold sensitive. Mine is a .22 and has a UTG droop compensating weaver mount and a UTG 3-12x44 swat accushot scope. Awesome rifle.
Things I liked: I recently purchased the Diana 48 .22 to6 on July 2016 and I tell you what before I review the product I would like to think Pyramyd Air excellent customer service and standing by their word ,as far as the rifle goes it has excellent accuracy and Trigger and power as far as the weight it will feel heavy Once you pull it out of the box but after using it for 10 minutes it'll feel very normal and the cocking effort it'll feel a little strong the first 5 - 10 attempt but after that you'll get used to it and you would have no problem with it at all some people say the rifle has short stock but that didn't appear the problem at all with me even though I have long arms The Recoil at my judgement I think it's medium and all that I think it's because that little extra way that rifle has which also makes it more stable while standing without an arm rest not to mention also I was shooting from iron sight so no scope or anything .
Things I would have changed: I could see better iron sights on this rifle
Things I liked: T-06 trigger is very good. Accuracy is excellent in my book. Overall quality is very good. I wanted to try a fixed barrel .22 gun from Germany or UK for the sake of accuracy. It is very accurate by my standards, once the pellet choice is figured out. .
Things I would have changed: This gun is a bit heavy but it's not ridiculous. This probably adds to the stability and thus the accuracy. Also, this is the loudest springer I own, but, again, not too bad. I would like to see a shrouded barrel, like my Benji NP, to quiet it down a bit. Yes, I know - weight.
What others should know: When I first received the Model 48, I was astonished by all the noise and roughness when cocking it. This is quality? Not compared to my Beeman R-9 it's not. Came very close to sending it back. Ceasar, in Texas, suggested I shoot it some more first. So, I cleaned up some sharp edges, applied some oil to the spring and moly grease to the bolt and started to shoot. It is now much better and getting better. I like it - a lot. It's now nearly as good as an old, old Model 52 (.177) I have. The best pellet for me has been the JSB Exact 13.4 gr. The Crosman Brown Box Premiers are also very good and, surprisingly, so are the inexpensive, off the shelf Crosman Premier domes, 14.3 gr. I don't now why, but the heavier JSB Jumbo Heavies, (18.1 gr,). group well, but actually impact about 3" higher, at 27 yrds, than anything else I tried. Go figure! Bottom line is that this is now my favorite and most accurate .22 air rifle and I am a happy camper!
What is the LOP of this rifle?
Most parts for this 'Air Arms" are not identifyable from available schematics nor available for purchase from any "Googled" search. I have a RWS/Diana 48/52, purchased from "Pyramid Air" about 1993?, It has about 2000+- rounds thru it when spring broke and discovered rear end of plastic spring guide had also broken into pieces upon disassembly. Only replacement parts for repair are from alternate source after much research. Suggest purchasing a much cheaper air gun, and avoid RWS/Diana.
Just got the RWS/Diana 48/52, .177, back together this afternoon with the Vortek spring assembly installed. I used a liberal amount of their lube on the spring but not as much as they suggested. Very light lube to the Piston seal (original) which appears to be in excellent condition. Cleaned everything with degreaser and alcohol. The new guide doesn't allow the piston to travel as far back as the old which results in the cocking action to need an extra effort to engage the locking mechanism, and the auto safety does not fully activate. I'll need to investigate further to find what is causing this issue. The gun is quieter and initial results indicate a more consistant grouping of rounds fired, although it was only at 10 yards. Will play with it some more later and mount a drop compensator rail and a Leapers for a longer range evaluation.
Is there a difference between an umerex Rws and a Diana Rws?
This rifle is made by Diana of Germany RWS was a distributor, now Umerex is the distributor for Diana.
|Max Velocity||1100 fps|