Roll over image to zoom in
1-year limited warranty
List Price $659.99
Earn 500 Bullseye Bucks
Contact Customer Service:
Call: 888-262-4867 (GUNS)
|Max Velocity||1000 fps|
|Suggested for||Small game hunting/plinking|
|Trigger Pull||5.0 lbs|
|Max Shots per Fill||6|
Create an online review and share your thoughts with other customers
Things I liked: Very high quality is obvious, with a beautiful wood grip. I have not tried to see how many shots I can get on a full pressurized system but I have not noticed any negligible difference after 18 shots. Easy to pressurize with my Hill pump. and seems very accurate. Would be great for back packing to get camp meat.
Things I would have changed: I think I could forego the wood and have a slimmer and a more functional pistol grip with a weaver rail under barrel for a light or laser for field use.
What others should know: A little expensive but the quality tells you why. For a hand gun to shoot close to 1000' per and be this accurate is a testament to modern day craftsmanship.
Things I liked: Luv this AR6. Its as close as a shooter can get to a mid-power .22 rifle. Accurate for 12 good hard shots. Meets all my expectations. Single Action is smooth as silk. Solid Steel 6 Round Cylinder makes this Revolver cycle nice and consistent. How fast can you shoot? (Do Not shoot in Double Action, Must be cocked then trigger pulled:^) AR6 can keep up at any speed you can shoot. The stock is very nice No Varnish to chip and mark up. Sanded smooth and oiled. Proper way to treat a piece of walnut I must say. Heavy Duty Hammer and Trigger great single action setup at its price range.
Things I would have changed: More contoured Stock. Little of that Nice Hard Walnut Shaved off would save some weight, like 1/4-1/2lb. Bottom Nub is HUGE, but works excellent with a Bi-Pod or Gun Rest for a level stable platform to shoot from. A Lighter Tactical Look would be cool. It is LOUD. Shroud and Baffle the Barrel Would be nice to have non-destructive Double Action
What others should know: It will bend parts inside if you shoot Double Action (Pulling the Trigger without cocking the hammer) youtube tutorials by Dirt'ae Harry are very informative, just too much incorrect info. The Cylinder Magazines that are shown on the video's have been modified too shoot the longer Pointed Eunjin 32.4gr Pellets. Todays AR6 can only shoot the Lighter Round Head Eunjin 28.5gr Pellets. Dirt'ae Harry's Beard is painted on:^P 12 shots refill it tends to shoot high first couple shots, and a bit Low last 2 shots.
Things I liked: The pistol is much lighter than I thought it would be. Should make a great hunter.
Things I would have changed: It would be nice if it had a air gauge.
I have a Hunting Master-P. I tried to use Air Venturi 90cu-in tank with fill station and adapter connected to probe. But quick disconnect releases from fill station to adapter instantly every time. Any suggestions? I have been looking for a coupling or adapter with 2 female ends to eliminate the quick disconnect.
Dave sometimes the fittings get worn from use. I have had nicks caused by the connection popping off. Take some 600 grit wet n dry sandpaper, if there are burrs from pop offs. Worked for me.
how many cc,s or cubic inches does the reservoir hold?
can the 22 cal be converted to 25 cal
To fill your PCP gun:
1.Pick a source of air shown at right
2.If an adapter is needed, one will be shown
3.Add both to your cart to get hooked up
Evanix Hunting Master AR6 with 1/8" BSPP connector (2M)
To start over click reset
|Max Velocity||1000 fps|