Date: 19/3/2024 6:27

PY-3197-6198

Hatsan AT P2 PCP Air Pistol & Shoulder Stock

Main Product Rating 4.04.0 (4 reviews)
Hatsan AT P2 PCP Air Pistol & Shoulder Stock

Hatsan AT P2, Image 1Hatsan AT P2, Image 2Hatsan AT P2, Image 3Hatsan AT P2, Image 4Hatsan AT P2, Image 5Hatsan AT P2, Image 6Hatsan AT P2, Image 7Hatsan AT P2, Image 8Hatsan AT P2, Image 9Hatsan AT P2, Image 10Hatsan AT P2, Image 11Hatsan AT P2, Image 12Hatsan AT P2, Image 13Hatsan AT P2, Image 14Hatsan AT P2, Image 15Hatsan AT P2, Image 16Hatsan AT P2, Image 17
PY-3197-6198

Not Available

click to see more from this manufacturer
  • FeatureIcon
    WARNING WARNING This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

See other products by Hatsan

See manual
If you like the light weight and configuration of a pistol but prefer the steady hold you get from a rifle, then the Hatsan AT P2 precharged pneumatic pistol is the perfect setup.

You can shoot this airgun with or without the shoulder stock. The stock telescopes almost 4 inches (25.2" to 29.10"), and the comb is vertically adjustable. This will come in handy if you plan to share this air gun with others, such as younger or smaller shooters.

Hatsan barrels have earned a reputation as being quite accurate, and this pistol is no exception. If you plan to shoot targets, tin cans and spinners most of the time, .177 caliber would be your best choice. However, if pest control and hunting are a large part of the reason you're getting this air pistol, select either .22 or .25 caliber.


  • Hatsan AT P2 air pistol
  • Precharged pneumatic
  • 10rd repeater (.25 holds 9 rds)
  • Sidelever
  • 200 bar (2,900 psi) max fill
  • 50cc removable reservoir with integral pressure gauge (manometer)
  • Quick-disconnect fill adapter
  • 35 max shots per fill
  • TruGlo fiber optic front sight adjusts for elevation
  • TruGlo fiber optic rear sight adjusts for windage & elevation
  • Resettable manual safety
  • Optics rail accepts Weaver* or 11mm mounts
  • Quattro 2-stage adjustable match trigger
  • Black synthetic stock and grip
  • Grip has finger grooves, right-hand palm shelf, thumbrest and palm swell
  • Synthetic stock
  • Anti-double-feed mechanism prevents more than 1 pellet from loading
  • Patented anti-knock mechanism prevents air from exhausting when rifle is knocked or bounced hard
  • Gold-plated trigger blade
  • 15-25 useful shots per fill in .177 caliber
  • 15-25 useful shots per fill in .22 caliber
  • 9-18 useful shots per fill in .25 caliber
  • Includes shoulder stock,** 2 rotary clips, fill probe, depressurizing tool, 2 hex wrenches, bag of spare seals, hard case & owner's manual

*Weaver mounts are not standard. We do not recommend using them.

**Pistol can be used without shoulder stock.

See other products by Hatsan

See manual

Specs

Max Velocity780 fps
Overall Length29.1"
ButtplateVentilated rubber
FunctionRepeater
Weight6.4 lbs
ScopeableWeaver & 11mm dovetails
SafetyManual
Suggested forSmall game hunting/plinking
Caliber.22 (5.5mm)
Muzzle Energy19.8 ft/lbs
Loudness5-High
Barrel Length10.4"
Shot Capacity10
BarrelRifled
Front SightAdjustable for elevation
Rear SightAdjustable for windage & elevation
TriggerTwo-stage adjustable
ActionSidelever
PowerplantPre-charged pneumatic
Max Shots per Fill25
Body TypeRifle
Fixed/adj. powerFixed
Cylinder Size50 cc

Average Customer Review

Rating 4.04.0 (4 reviews)
5 star
4 star
3 star
2 star
1 star
2 reviews
1 review
1 review

Create an online review

Customer images

Sort by Date: Newest–Oldest

Rating 5.05.0 5.0

Rating 4.04.0 4.0

Rating 5.05.0 5.0

Things I liked:

Accuracy Solid construction Removable stock that also has a great deal of configuration flexibility Multishot Picatinny AND dovetail rails Inexpensive magazines and additional airtubes

Things I would have changed:

Pay more attention to details! The barrel itself is of great quality, but the crowning job was just done in haste. I was able to recrown the barrel using professional (but expensive) tools in 10 minutes. The accuracy improved quite a bit. Also, most parts were not lubed. You can extend the longevity of this gun by properly selecting and applying lubricants to various parts of the gun. I know the gun has a 1/2x20 UNF barrel, which is great. However, for those of us who want to stay legal and not have a loud gun, Hatsan should consider a version that has a non-removable factory installed shroud. But keep the 1/2x20 UNF threading option available to those who are more, well, adventurous.

What others should know:

This gun is heavy as a pistol, but it balances well. As a carbine, it is actually quite light and also well balanced at the same time. To maximize accuracy, use a magnified sight. I was doing okay at 10 yards using a 2-MOA red dot, but at 25 yards, using a magnified scope dramatically improved accuracy. There are lots of mods one can do to this gun. Most, if not all, of these mods will void the warranty. However, these mods can change muzzle energy (tune up or down) and improve the overall efficiency of the gun. My .177 is now shooting at 11 FPE and good for 20 shots with a low extreme spread. That's not bad for a little 50cc air cylinder! Also, the shoulder stock may be both difficult to put in and wiggle at the same time. Put a little bit of Gorilla tape on the stock side, then use a little bit of grease on the pistol side. Mine now slides in with ease and yet with no wiggle from that joint. The dovetail of this gun does NOT work with BKL rings.

Rating 2.02.0 2.0

Rating 3.03.0 3.0

Rating 3.03.0 3.0

Things I liked:

Fit and finish were as good as I expected.

Things I would have changed:

I wish some manufacturer made a powerful (600+ FPS with 25 grain lead pellet).25 caliber air pistol that was smaller, even if it was only a single shot pistol.

What others should know:

The connection between the female air input to the pistol and the male output from the air tank leaked badly. I was not able to overcome the leak and returned the pistol.

Rating 4.04.0 4.0

Rating 4.04.0 4.0

Rating 5.05.0 5.0

Things I liked:

The feel of this gun is amazing. The grips are very comfortable. The gun is really accurate, I put a Leapers UTG 3-9x32 CQB Bug Buster Rifle Scope on it and had is sighted in with 4 shots and 15 yards. The cocking action is fun to do because it is different than most guns, the clips are also nice and easy to reload. The gun is a little heavy but I'm putting it in the pro column because the weight is well balanced and feels right.

Things I would have changed:

Like everything I ever read about this gun before getting it, it is LOUD. I knew it was one of the louder guns but everything else out shines this fact. I did try to shoot it in my backyard to sight it in, thank goodness it only took 4 rounds to sight in because every shot made me cringe. The weaver rings that I bought for the gun didnt seem to work, they just didnt fit, so I switched to 11mm dove tail and it worked just fine. This gun does leak some air when left sitting for days, not too much but some. The air filling could have been set up better, the air tube needs to have a direct connect to the pump.

What others should know:

Overall I purchased this air gun knowing that it was going to be too loud for backyard shooting, which it is, but I enjoy it enough to take it places to shoot, and have transformed my garage into an indoor shooting range, 10 yards, to shoot this gun. So overall it is a great gun to add to my collection, just wish I could shoot it more.

+ Load More

Got a question or answer?
Log in to participate

  • Jeff from USA asked:

    What velocity does this air gun shoot 25 caliber 25.4 grain pellets as calculated by a Chronograph?

    • Gregory from USA answered:

      it should shoot in the high 6 hundred range.

  • Matthew from USA asked:

    can this be run on co2?

    • rjpp from USA answered:

      i dont see how you would get c02 into the air cylinder so i'd say no it cant!!!

  • joseph from USA asked:

    just bout this guys from you but i have a hand pump for a Benjamin Mrauder... i don't want to bu another pump.. can i get some kind of adapter to switch back and forth?

    • rjpp from USA answered:

      will have to purchase male quick disconnect for$9.95 will hook-up hatsan fill probe to your pump good luck

    • Val from USA answered:

      Click on the PCP Hookup tab to the right, and it will help you confirm/make the choice on the adapters if any are needed

To fill your PCP gun:
1.Pick a source of air shown at right
2.If an adapter is needed, one will be shown
3.Add both to your cart to get hooked up

Hatsan AT P2 PCP Air Pistol & Shoulder Stock with 1/8" BSPP connector (2M)

To start over click reset

Airgun Academy Episode 38 - PCP Filling Systems

Compatible with Hatsan AT P2 PCP Air Pistol & Shoulder Stock

Buy With Confidence

TEST Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.

Free shipping may not be combined with a coupon unless stated otherwise.

View Shipping Info

Want More?

Join Our Email List for News and Deals!

123 text Join the Pyramyd AIR mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!

Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!

* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.