does not include shipping and tax
1-year limited warranty
List Price $300.00 Save $40.01 (13%)
Want it delivered 04-02-2015?
Order it in the next 7 hr and 54 min and choose Next Day Air Morning at checkout. Details
Average Customer Review4.5 (17 reviews)
Create an online reviewand share your thoughts with other customers
Things I liked:This is a very accurate revolver. It has a fairly long trigger pull in D/A which can take away from the accuracy somewhat but in single action it is amazing. The gun has a very realistic feel and heft and I like the 10 round magazine as well.
Things I would have changed:A bit expensive but in line with similar quality guns.
What others should know:Seems to shoot a variety of different pellets well. I get between 60-70 shots before I notice a significant drop in CO2 pressure.
Things I liked:Heft, feel, and balance are very close to the real 586 firearm. Sight picture is very good to excellent. Trigger is good but not perfect. CO2 cartridge loading is easy as is changing out an empty cylinder for a loaded one. Liked the lack of recoil and relatively quiet report. The gun is quiet enough for indoor/basement target practice without forcing everyone in the house to wear ear protection.
Things I would have changed:Trigger is much different than the real firearm; but not bad. Single action trigger is heavier than my real 586 but still crisp if somewhat gritty. The double action trigger is lighter than the real firearm and has a shorter stroke. This is understandable as cylinder mass is much lower than in the real 586 and only a tenth of a cylinder rotation is required for each trigger pull. Both triggers are more than adequate for good accuracy even if they aren't the same as the firearm's. The rear sight doesn't always follow the movement of the elevation adjustment screw. I had to raise the rear sight to sight-in. After I backed the screw out a bit, I had to pull up on the sight itself to get it to follow the screw...probably a burr in the channel it sits in. Did not have to touch the windage adjustment. The top of the right grip panel does not lie perfectly flat against the frame when a CO2 cylinder is loaded. I can see daylight between the frame and grip.
What others should know:I own both a 4" 586 and a 6" 686 firearm. Both have incredible triggers. Didn't expect a $250 CO2 pistol to duplicate the real firearm trigger, and wasn't surprised when it fell short; still it's plenty good enough for 10 meter target work. I've only put one CO2 cartridge through this gun to date. Was able to get 55 shots from it before noticing a velocity drop-off. Accuracy seemed quite good offhand. It was about what I'd expect from my real 586. Accessory cylinders are still looser than the two that came with the gun. The RWS R10 7 grain wadcutter pellet works good in both, but the pellet does drop further into the accessory cylinder chambers than it does in the originals. The pellets do NOT drop out. Bought this to save on ammo expense while getting frequent indoor practice. Looks like it fills the bill. Will post again if I learn more about this handgun.
Things I liked:Very realistic feel. Love the rubber grips. Very accurate for a replica.
Things I would have changed:I would like to load pellets into a "bullet like" cartridge, similar to the Dan Wesson bb revolver.
Compatible with Smith & Wesson 586, 4-inch Barrel