Date: 27/11/2015 23:27

UHC 132 revolver 6 inch

See also

  • Description
  • Specifications
  • Customer reviews
  • Q & A: 2 answered questions
  • 1:1 Real modeled high grade gas driven revolver
  • DA (Double Action) design. Shoot continuously without pulling the hammer
  • Hammer can be pulled manually to simulate the SA (Single Action)
  • HOP UP function efficiently extend the shooting rage and accuracy
  • Heavy weight design provides the best shooting experience
  • Copper cartridges (optional) form luxury feeling and further weight the gun body
  • There are 6 rounds in the cylinder and the way cylinder swivels and loads is the same as the real gun
  • The grip is made of special material and it delivers wood-grained quality
  • The rear sight could be adjusted. For example, up, down, right or left
  • Includes revolver shells
  • The front sight is good for targeting use
  • Gun body and grip are finished by satin paint and it looks as same as the real gun

other products by UHC

Max Velocity310 fps
Barrel Length6.0"
Shot Capacity6
Front SightBlade and Ramp
Rear SightAdjustable for windage and elevation
Suggested forSkirmishing
Hop UpYes
Body TypePistol
Weight1.56 lbs

other products by UHC

Average Customer Review

4.0 (4 reviews)
Create an online reviewand share your thoughts with other customers

3.0 3.0

4.0 4.0

By Ke from USA on 2011-11-12
See all my reviews
Was this review helpful?
0.00 ratings

Things I liked: Look real , smooth action, good for its price

Things I would have changed: metal cardtridge so put more weight on the gun

What others should know: for beginner, or young boy -typically back yard shooting when speed is not necessary

4.0 4.0

5.0 5.0

4.0 4.0

By Andrew from USA on 2010-04-09
See all my reviews
Was this review helpful?
0.00 ratings

Things I liked: good feel, accurate, nice power. over all its a fun gun.

Things I would have changed: Improve the safety. Mine doesn't work at all. it slides back like it's supposed to but the gun is still fully functional, ie the trigger works, the hammer works and it will shoot just like normal

What others should know: Its a good gun. Its a bit long for any kind of fast draw though. Over all I would buy it again, in fact I did. One for each hip.

5.0 5.0

5.0 5.0

4.0 4.0

By Madrias from USA on 2009-07-10
See all my reviews
Was this review helpful?
3.02 ratings

Things I liked: Well, first and foremost, one would have to know I really like revolvers. This one I like for 2 reasons: one, it was a birthday gift, and two, my friends and I have a lot of revolver wars. This gun is accurate as long as you don't use the double action. It hits fairly hard. has a nice, smooth hammer pull, a realistic design, and is stronger than the springer I'd been using, by, well, a lot.

Things I would have changed: I personally do not like the sights on this gun. My rear sight is crooked. Doesn't ruin the aim, but it's an aesthetic thing to me. I would also rather it use inexpensive CO2 cylinders and not propane. I hate the smell of propane. Last, but not least, I would want it in nearly-full metal. I don't care about things like the handle being plastic, but give me a nice metal gun. Another aesthetic thing I don't like right now, is the gap between hammer and gun is quite large.

What others should know: First, this is realistic: it has 6 rounds. Don't buy a revolver, then complain that the round capacity is terrible. Revolvers don't have much for capacity. Second, you'll need propane or green gas to fire it. The major internal mechanisms are all metal, but the most of the gun is plastic. I also had to re-glue my front sight down, but that was my fault. I mentioned it to let you know it's a separate piece of plastic. The grip will also fit large hands with plenty of room to spare, and the 6 shells can be removed to load, or loaded while still in the gun. Personally, I'd say leave them in the gun unless you have a lot of money to spend on little plastic shells. You, like me, will probably dump them out like in the movies, at least once.

Show Other ReviewsCreate an online review and share your thoughts with other customers
  • Joseph from USA asked:

    can I use co2 for this gun

    • Richelle from USA:

      No, the item is not made for CO2.

    • Dan the Man from USA:

      No, just green gas.

  • Ivan from Spain asked:

    Is plastic

    • Richelle from USA:

      Yes, the item is plastic.

Item Description

SDUG132 [PY-1312-2344]
132 UHC 6" Revolver
Uses : Green Gas
Orange muzzle
Max Velocity310 fps