Roll over image to zoom in
List Price $15.00 Save $2.01 (13%)
Earn 13 Bullseye Bucks
Item Code: AA-PFH74.52 [PY-P-713]
|Suggested for||Small game hunting/plinking|
|Head Size||4.52 mm|
Create an online review and share your thoughts with other customers
Things I liked: These pellets may be available when the JBS Match Diabolo pellets are not. They seem to shoot exactly the same.
Things I would have changed: Nothing at all.
What others should know: No except that they were available when the JSB brand was not.
Things I liked: This pellet is very consistent. Very few vary more than .2 of a grain than the listed weight. The head diameter is also very consistent. I use a pellet gage to check the head diameter and these pellets are either 4.51 mm or 4.52 mm.
Things I would have changed: Change nothing on the pellet design. This pellet is what my rifle is tuned for and shoots the best. The tin could have a better lid but that is very minor.
What others should know: If shot to shot consistency is your goal find what diameter shoots best in your rifle. Buy the diameter that your rifle likes the best and weigh a tin or two to get an idea of the quality control the maker has on their product.
Things I liked: I like the shape of the pellet. Very clean and packaged quite nicely. I used these in my Remington xgp rifle and as far as I am concerned, these will be my go to pellets. Trajectory is flat and impact is very solid. At 30 yards pellet stacked on top of pellet. Moved to 60 yards and pellet was on to of pellet. Accuracy is easily achieved with these pellets; something that I cannot say of other pellet manufacturers. Squirrels and rabbits here I come!
Things I would have changed: I would change nothing about the pellet. If the tin were a screw on top or snapped together a bit more snugly, is the only thing I would change about the product.
What others should know: Well made and extremely accurate.
Will these work well in the Daisy 880?
Yes these will work . I normally use the crosman 10.5 grain in my 880 but these should work fine to. Only thing pellets are hard to load in the 880's if they are to long (in my experience only) .
Are the air arms and Falcon pellets on order. Are they still being made?
Yes, they are on order