Roll over image to zoom in
Item Code: BN-41022 [PY-P-618]
Create an online review and share your thoughts with other customers
Things I liked: I tested the Beeman kodiak c.p. at 26 yds tho, a bit windy, able to hit a 10shot grp.quarter inch grp at about the same above the bullseye! Not so much of speed of the pellet, But the accuracy was good and is one of the pellets for my bsa aside from jsb 18.13 & 15.89 gr airarms 18.00gr. etc, Heres' the chrony readings,High- 810 Low-780 Avg. 797 E.S.--30 S.D.--10. This is a very good & stable pellet in flight, next time Ill' try this at 50 yds!
Things I would have changed: Make it 400 or 500 in tin!
What others should know: Very clean pellets!
Things I liked: These are great for larger targets like squirrels. Also good for accuracy out to 100 yards for targets like crows. Not so good for very small targets like rats or chipmunks since the pellets tend to just pass through. Try the Beeman Silver Bear 12.65 grain pellets for small, close range targets since they will fragment and do more damage. Really like the copper plating for handling.
What others should know: Using these and the Beeman Silver Bear pellets in a Benjamin Marauder PCP airgun.
Things I liked: It's the only load I will shoot from my Walther Talon Magnum w gas piston. I tested hundreds of rounds of other types/brands. This rifle will go supersonic with lighter loads. The weight of these pellets seems perfect for my .22.to stay subsonic, which greatly increases the accuracy. I prefer the copper wash, as it seems to shoot the best from my Walther barrel. I believe the copper minimizes lead fouling in the barrel. I usually use a very thin film of lubricant, which I've formulated myself and refined over the years. I believe this minimizes copper fouling. Once I notice the accuracy dropping off (approx. 250-500 rounds), I snake the barrel one pass w copper solvent and it's back to normal.
Things I would have changed: I would find a way to protect the pellets from contacting each other in the package, which can damage their surfaces with tiny , especially in the skirt area. These imperfections probably matter in a higher end air rifle but I won't know because they all have them. That said, they are an excellent value without the cost of individual packaging. Probably perfect for 99% of the airgunners out there.
What others should know: There are 5stars in each of the review categories but I didn't put them there. Can't figure out how to change them.
I have the marauder 22 pistol and these pellets will not shot. They will load but won't shot. I have to pick them out with a sharp knife point!!! How come??
MRods have a choked barrel. I do not know where the choke located on this gun though.
Sounds like they are just too tight in the breech.