List Price $5.95 Save $2.50 (42%)
Want it delivered 07-01-2016?
Order it in the next 9hr and 10min and choose Next Day Air Morning at checkout. Details
Buy and Earn 3 Bullseye Bucks!
Item Code: DY-7922 [PY-P-337]
Things I liked: 14 grains... fast as heck!
Things I would have changed: the container was cross threaded, impossible to open (I am a body builder and was unable to twist it open) I had to use a hammer and chisel to open the tin, the act of opening it naturally squished and dented many pellets and also caused a cloud of pellets as the went every direction upon opening. I have found maybe 20 usable pellets so far. So a great price becomes a huge waste (considering shipping as well).
What others should know: DONT use a hammer and chisel to open the tin if it is cross threaded, just call the company and arrange for a new replacement tin...learn from my mistake.
Things I liked: cheap pointed worked well in American airgun barrels which have a 217 bore good pellet for metal silhouette plinking .... works well in co2 guns for some reason...maybe because they are soft and seal barrel well
Things I would have changed: lead dust lead chaff in bottom of tin stop coating them with graphite
What others should know: will work well in lower power airguns such as crosman 2200 , 1322 and 2240......the reason is becuase they are designed to be used with AMERICAN airgun barrels which bore out to about 217 instead of more standard European .221 even in a tight barrel these are not most accurate but they are soft and they are great for hit metal targets far away for target fun........these will group well til about 20 yards in a 600 fps air rifle (industry rated 600 fps for lead)........... would not hunt anything with these becuase they are not super accurate
Things I liked: Good pellet with the right gun. These work really well with good accuracy in my 2289 (I guess that they like Crosman barrels). These also give decent penetration.
Things I would have changed: Bring the price back down these used to be a lot cheaper than the Daisy Wadcutters, not any more.
What others should know: These are very soft lead, as such the skirts can become deformed in shipping so you may wish to invest in a pellet skirt shaper (I made my own), this is no fault of the manufacturer just a soft pellet. The head size is very consistent.