List Price $15.00 Save $3.05 (20%)
2X Buy and Earn 24 Bullseye Bucks!
Item Code: HN-92176350003 [PY-P-1105]
|Muzzle Energy||26 ft/lbs|
|Muzzle Velocity||650 fps|
|Energy at 25 yds||21 ft/lbs|
|Velocity at 25 yds||577 fps|
|Energy from the initial value at 25 yards||79 % Retained energy at 25 yds (an expression of the 25-yd energy compared to the muzzle energy)|
|Energy at 50 yds||15 ft/lbs|
|Velocity at 50 yds||509 fps|
|Energy from the initial value at 50 yards||61 % Retained energy at 50 yds (an expression of the 50-yd energy compared to the muzzle energy)|
Create an online review and share your thoughts with other customers
Things I liked: these pellets are very uniform and I did not find any damaged,i like the weight and they are accurate in my 125 hatsan 25 cal. the screw on lid is nice I will buy more.
Things I would have changed: nothing
What others should know: the barracuda hunter is a good pellet give them a try. they hit hard and penetrate deep out of my hatsan 125 25 cal. some guns might not shoot good with them but my rifle did. I shoot from 30 to 75 feet most of the time.
Things I liked: My Daystate wolverine B Hi-lite in .25 liked these pellets a lot. Pretty consistent groups. My gun didn't like the shorter or lighter pellets at all!
Things I would have changed: Fine the way they are!
What others should know: I tried using JSB's long heavies in the magazine They wouldn't fit easily and had to be pushed into it hard before the mag would rotate to load another pellet. Due to skirt size ! Now this is My Wolverine magazine. Not sure if anyone else may of had the same issues with other manufactures mags !
Things I liked: accurate for a hollow point.
Things I would have changed: they need to be made from softer lead, or a better design of the hollow point.
What others should know: they seem to be made from much harder lead than the other h&n's i have. 900fps barely makes them expand on soft targets.
When oiling pellets for a PCP what type of oil is used and is it readily available?
According to Tom Gaylord: Whiscombe Honey is a mixture of two-thirds Hoppes Gun Oil (not Number 9 bore cleaner!) and one-third STP Engine Treatment, by volume. Shake the mixture until is takes on a light yellow color. It will look like thin honey, hence the name. This mixture should not detonate easily in a spring gun.