Item Code: HN-92014500205 [PY-P-3]
|Head Size||4.50 mm|
Things I liked: I measured 16 pellets (2 measurements on each pellet 90 degrees apart) for head size and skirt size. The pellets claimed to have a head size of 4.50mm. The average head size was 4.474mm with a range of 0.04mm and a standard deviation of 0.011. The average skirt size was 4.633mm with a range of 0.10mm and a standard deviation of 0.026. The range in head size was on the high side of all the brands and models of pellets I have measured so far and the range in skirt size was among the worst of any brands I have measured. The soft skirt way not be as important as head consistency but it could affect velocity because of the variation in how tightly they fit along barrel walls. I found the actual head size to be smaller than their tin of 4.49mm head size.
Things I liked: price + accuracy!
Things I would have changed: Nothing
What others should know: These shoot about the same as R10's at least in my rifle but they are cheaper.
Things I liked: I shoot this pellet out of my tx200 r9 hw97k at 30yar it is a uniform pellet that accurate and is good in my guns so I use it
Things I would have changed: not a thing like to see them in 7.9 grains
What others should know: good pellet