List Price $16.50 Save $3.51 (21%)
Earn 13 Bullseye Bucks
Item Code: HN-92214500003 [PY-P-971]
|Suggested for||Small game hunting/plinking|
|Muzzle Energy||10 ft/lbs|
|Muzzle Velocity||801 fps|
|Energy at 25 yds||7 ft/lbs|
|Velocity at 25 yds||653 fps|
|Energy from the initial value at 25 yards||66 % Retained energy at 25 yds (an expression of the 25-yd energy compared to the muzzle energy)|
|Energy at 50 yds||4 ft/lbs|
|Velocity at 50 yds||528 fps|
|Energy from the initial value at 50 yards||44 % Retained energy at 50 yds (an expression of the 50-yd energy compared to the muzzle energy)|
Create an online review and share your thoughts with other customers
Things I liked: These pellets fit nicely in the breach of my rifles - not to loose and not to tight. The Terminator pellets are also extremely accurate at 10 yards. I also found them to be very uniform in shape and size.
Things I would have changed: Nothing
What others should know: I tested four different pellets for accuracy at 10 yards; two hollow points and two pointed pellets. The H&N Terminator pellets were the most accurate. Shooting five different 5 shot groups, the Terminator pellets grouped very tight. All five groups with the Terminator pellets had a maximum of 1/4 inch center-to-center grouping. My test rifles were three different low power Gamo Recon rifles (525 fps). I conducted a second accuracy test against 5 other different pellets and the Terminators won again. I now plan to use these for rat hunting.
Things I liked: The expansion and accuracy. Turned my cheap Remington/Crosman Airmaster rifle into a tack driver. It sent many sparrows and crows to their graves.
Things I would have changed: I don't have any.
What others should know: Good for hunting and pretty good plinker for the price you get 400, although they tend to ricochet easier than others.
Things I liked: Good skirting makes for nice fit in magazines and chambers
Things I would have changed: Weight-Needs to Be Heavier and MORE of an elongated Pointed
What others should know: These pellets will fit in magazines (for your pellet pistols or pellet rifles) they have a good velocity at 1ft to 30yrds and from 400fps to 1200fps but will buckle before penetrating any hard/semi-hard surface.