So, are you looking for a fresh take on airguns?
Some new information, perhaps?
Check out our daily report!
Monday thru Friday find new topics about air guns, BB guns and airsoft guns. Ask your questions by clicking on the comments link at the bottom of each post.
Save an EXTRA $10 off $100 with eBillme! Instant rebate offer: Apply the eBillme coupon code (SAVE10EBM) after you choose eBillme as your payment option at PyramydAir.com.
Special offer can be combined with other promotions at PyramydAir.com. Offer valid from July 19, 2010 to December 31, 2010. | Offer details
By Mark from USA on 2010-07-13 17:23:35 - See all my reviewsAdd comment to this review
Things I liked:Very good quality hardware, hose seems a little lite for 3000lbs of pressure. Things I would have changed:Better hose, and include quick disconnect for your gun. What others should know:This set up should last several years.
By Alan from USA on 2010-05-03 15:05:19 - See all my reviewsAdd comment to this review
Things I liked:Easy to use...kind of. Things I would have changed:It needs to be made of either marine grade brass or stainless steel. Longer hose. What others should know:This item is machined, sloppily, from aluminum. The threads are very coarse for all fittings and the clamp screw. The relief valve leaks a small amount
... Read MoreThings I liked:Easy to use...kind of. Things I would have changed:It needs to be made of either marine grade brass or stainless steel. Longer hose. What others should know:This item is machined, sloppily, from aluminum. The threads are very coarse for all fittings and the clamp screw. The relief valve leaks a small amount of air during fill. I got tired of trying to use it and went to my local dive shop and spent the $$$ on a premium adapter then went to my local Parker hose retailer and had a 3 foot hose made up (smaller diameter and rated to 6000PSI). Now everything is working like it should.
By Kwan from USA on 2010-03-18 21:15:48 - See all my reviewsAdd comment to this review
Things I liked:Good overall adapter. Things I would have changed:Larger pressure GAUGE. What others should know:The hose leaked. It needed some teflon and tightening.
By Dale from USA on 2010-02-15 12:16:42 - See all my reviewsAdd comment to this review
Things I liked:Works fine on the benjiman discovery and marauder. Removed the hose and screwed in the air force adaptor and filled the condor. Will have to get a quick connect for air force adaptor now to make it more convenient Things I would have changed: Fix clearance problem on some tank valves. What others should know:On
... Read MoreThings I liked:Works fine on the benjiman discovery and marauder. Removed the hose and screwed in the air force adaptor and filled the condor. Will have to get a quick connect for air force adaptor now to make it more convenient Things I would have changed: Fix clearance problem on some tank valves. What others should know:On some tank valves there may be a small clearance problem.Mine is tight but works.Some have had to grind a small amount for clearance.
By Bob from USA on 2010-01-26 11:06:16 - See all my reviewsAdd comment to this review
Things I liked:Fits my 80c/ft tank like it was made for it (doh!) Things I would have changed:There is a relief hole on the top side of the adapter that releases pressure on the hose after you've filled your gun. The first time I used this, I got a blast of air right in the face. No harm done, but if a bit of dirt or debris from shipping
... Read MoreThings I liked:Fits my 80c/ft tank like it was made for it (doh!) Things I would have changed:There is a relief hole on the top side of the adapter that releases pressure on the hose after you've filled your gun. The first time I used this, I got a blast of air right in the face. No harm done, but if a bit of dirt or debris from shipping (or residue from the machining operation) been in that hole, it could have been a problem. If the manufacturer had just drilled the vent out the bottom instead of the top, there would be no issue. What others should know:Nothing. Works just like it was intended to. I can't imagine filling my rifle with a tire pump.
By Scott from USA on 2009-12-23 13:24:11 - See all my reviewsAdd comment to this review
Things I liked:Nothing because it doesn't actually work with the scuba tank Pyramyd ships (Leisure Pro 80# Yellow Tank with K-Valve). Things I would have changed:I went with Pyramyd on the purchase of a gun (Marauder) and the air refill system because I wanted to be sure it would all work, being my first PCP gun. Turns out that it
... Read MoreThings I liked:Nothing because it doesn't actually work with the scuba tank Pyramyd ships (Leisure Pro 80# Yellow Tank with K-Valve). Things I would have changed:I went with Pyramyd on the purchase of a gun (Marauder) and the air refill system because I wanted to be sure it would all work, being my first PCP gun. Turns out that it doesn't work. I took the tank, k-valve and the scuba-yoke (what Pyramyd calls the Scuba Tank Adaptor and Hose) to my local dive shop for assembly and filling--the tank and k-valve are identical to what is sold at the dive shop. Unfortunately, after the dive shop personnel looked it over and and over, it appears that this Pyramyd supplied adaptor is too thick on its two long sides which doesnt allow it to set down properly over the k-valve. This THICKNESS causes it to set too high which negates any possible functionality with the Pyramyd supplied valve. My conclusion: Pyramyd has no clue that it is selling something that doesnt work. What others should know:Another reviewer mentioned having to GRIND this adaptor down at the point where it straddles the k-valve. I haven't decided whether or not to do this because it is quite likely that grinding this part will void any warranty on the part and on Pyramyd's commitment to "satisfaction guaranteed". Grinding may actually be hazardous since the adaptor was engineered the way it is to work under extremely high pressure. I called Pyramyd about the problem and so far they have been no help. This is my first purchase from them which disappoints, to say the least. I may send the whole affair back to them (gun, scope, case, tank adn adaptor) and go with a retailer who will stand behind what they sell.
By Steve from USA on 2009-11-25 16:51:53 - See all my reviewsAdd comment to this review
Things I liked:Quality looked to be good Things I would have changed:Would not fit my scuba tank. What others should know:If you look at the review's you will notice that some not all had to grind the clamp to fit. I did not have a tank when I purchased the valve. When I purchased a tank it was past 30 days. So I had
... Read MoreThings I liked:Quality looked to be good Things I would have changed:Would not fit my scuba tank. What others should know:If you look at the review's you will notice that some not all had to grind the clamp to fit. I did not have a tank when I purchased the valve. When I purchased a tank it was past 30 days. So I had to pay for return shipping. The girl I talked to said they have had trouble with some of the clamps not fitting on tanks.
By Charles from USA on 2009-09-27 18:17:50 - See all my reviewsAdd comment to this review
Things I liked:This adapter does what it is designed to do and is very easy to attach to a scuba tank. Things I would have changed:I would like to see a larger gauge and a longer hose. What others should know:If ordering this for a Benjamin Marauder do not forget to also order the "Female quick-disconnect adapter with
... Read MoreThings I liked:This adapter does what it is designed to do and is very easy to attach to a scuba tank. Things I would have changed:I would like to see a larger gauge and a longer hose. What others should know:If ordering this for a Benjamin Marauder do not forget to also order the "Female quick-disconnect adapter with male thread" or else you won't be able to connect it to the gun.
dealers
my account
cart
track order
wishlist
compare
New customer? Start here.
Air Rifles 
