Made from heavy-gauge, sheet steel to stop and hold air gun pellets and standard velocity .22 long rifle rimfire lead bullets. Weighs over 20 lbs. so you know it is sturdy. Somewhat noisy but if you want the best trap going, this is the one to pick. Includes spring clip to hold paper targets. 11" (w) x 12"(h) x 8"(l). Use with lead projectiles only.
Paste cleaner gets bores sparkling clean without caustic liquids. Removes lead residue in just three passes. Cushioned abrasive action actually polishes your bore clean without damage. Used and trusted by precision shooters for over 40 years to clean their finest rifle bores. 2 oz. jar
Field proven and well received by hunters and target shooters. 1" tube.
Major Features : Rugged One Piece Tube Construction for All Terrains/Weather
Precision machined to exact tolerances from aircraft-grade aluminum alloy.
Completely sealed and nitrogen filled to stop moisture ingress.
Perfect for all terrains and all weather conditions.
Sealed Windage and Elevation Housing with Tru-Hunter Turrets
Windage and elevation housing features machine plate controlled seals, to eliminate risk of water ingress and fogging.
Tru-Hunter Turrets are manufactured in brass with easy to grip rings making adjustments simple even while wearing gloves.
Positive and precise 1/4 MOA for accurate and consistent shooting.
Wide Field of View with Tactical Mil-Dot Reticle
Wide field of view and edge to edge lens clarity allow for clearly picking up quarry on the peripheral edge of the sight picture.
The Precise Tactical Mil-Dot reticle allows the shooter to estimate ranges and enhance accuracy.
Power Illuminated Reticle with Red/Green Dual Illumination
Adjustable intensity of the illuminated reticle gives optimum reticle clarity in variable light conditions, increasing accuracy in daylight and twilight environments.
The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.
Special tape inside the rings keeps your scope tight without excessive clamp pressure!
If you use a single shot airgun, small caliber rimfire, or a studgun (tool used in construction) , you need this product -- the PELLETHOLDER. The PELLETHOLDER is the only known after-market device that will hold pellets in the correct position near the chamber of your rifle or pistol for convenient, fast, quiet, one-hand loading. Keep your eye on the target! Load by feel! The PELLETHOLDER can be used with repeating guns to have more ammunition readily at hand.
Model # 1720 holds 20 each .177 or .20 cal. pellets. (Approx. size 3" X 4")
Nothing looks cooler than a scoped rifle in a case!
For smaller profile scopes
Featuring Patented PillarLock Protection!
Holds rifle with large objective lens
Thick wall construction
Comfortable molded in handle
Lockable/airline approved
Black
Outside dimensions: 53.5"L x 13"W x 3.75"H
Inside dimensions: 52.25"L x 9"W x 3"H
dealers
my account
cart
track order
wishlist
compare
New customer? Start here.
Air Rifles 
