LOADING YOUR IZH 46 AIR PISTOL:


a) Make sure that the air pistol is pointed in a safe direction and the bolt is in the up position and your hands and finger are away form the trigger
b) Make sure you have completed the pistol cocking sequence before you insert the pellets with the skirt to the rear. Warning - If the pellet is not fully seated, it will be deformed when the bolt is closed / locked in place.
c) Close the bolt by depressing the bolt lever down until the bolt is locked down with the bolt lever. Warning - do not close the bolt until you are ready to fire, the safety on this air pistol is simply the bolt - if you have not closed the bolt the pellet will not be expelled from the barrel. Note - if you pull the trigger and the air has been compressed in the cylinder and the bolt is open (90 degrees from the firing plane) the pistol will discharge the compressed air in the cylinder.

Main   Firing   Cocking   Loading   Safety