Loading

Main Operating Loading Firing Adjustments Safety

Demounting the Magazine

Fully cock the rifle.
Grip the magazine as shown in Fig. 1 and slide the magazine out of the bolt housing without lifting.
Do Not attempt to lift vertically as damage to the indexing spring will result.

Mounting the Magazine

Fully cock the rifle.
Grip the magazine as show in in Fig. 2 and slide the magazine in the bolt housing applying downward pressure with the force finger to keep the base of the magazine against the bottom of the slot in the bolt housing.
Take care not to damage the indexing spring.

Loading Pellets

Hold the magazine as shown in Fig. 3.
Drop a pellet into the chamber.
Manually index to the next empty chamber as shown in Fig. 4 and repeat until the magazine is full.
Finally, line up the red dot on the pellet carrier with the "V" notch on the clear magazine cover.

NOTE: Be very careful not to damage the indexing spring when demounting or mounting the magazine. Follow the instructions carefully.