Main Operating Loading Firing Adjustments Safety

Trigger Adjustment

• The BSA Techstar trigger is factory set. Should you wish to adjust the trigger, remove the action from the stock to gain access to adjusting screws.
  
• Please note that the rifle should never be loaded or cocked when trigger adjustments are made.
  
• When adjusting the sear engagement screw (3) ensure there is sufficient engagement with the hammer.
  

1) Trigger pull weight
2) Sear engagement screw locknut
3) Sear engagement screw

Power Adjustment

• Remove gun from stock and then remove end cap.
  
• Place 3 mm allen key into adjuster screw.
  
• Turn clockwise to increase power.
  
• Turn counterclockwise to decrease power.
  

Main Operating Loading Firing Adjustments Safety

Home | Search | Browse | About | Contact | FAQ
Manuals | Custom Venom Shop | Privacy Statement | Links