Air Venturi Gen. 2 Single-Shot Tray for BSA/Gamo PCP Air Rifles

Just tryed it b s a sportsman H V. Very snug fit worked perf thank you to donie f l an pyramid air making my old b s a a back yard gun a single shot tack driver one pelet one squril

Less for shiping than wat i order maby lol

B s a hamer fourged barrel. Hard to beat r 10 if i wanted another p c p that is it

Price wasn't bad if it worked

Doesn't line the pellet up with breech properly in my Gamo Urban

Does not work with my Gamo Urban

Very good

Nice to have but not so practical to use. Half the time, pellets drop tail-end forward so you need to tilt sideways the airgun (GAMO Urban) to get the pellet out. It is like doing a toss coin hoping each time the pellet settles head forward. If one does not pay close attention to how the pellet lands, it is possible to close the bolt and ram the pellet the wrong way.

The design needs to be changed. The BSA single shot magazine has a better design but at $50, very expensive.

One needs to buy and try stuff in order to make a proper assessment. Online reviews by others are oftentimes helpful but sometimes, one needs to check things out for oneself.

This shot tray works well in my Gamo Urban PCP. Gives me the option of shooting single shots without using the magazine.

Some of the edges are a bit sharp and I had to break the edges with fine emery cloth.

This single shot tray was not available when I initially purchased my Gamo Urban. It's a nice option to have, and at a very reasonable price.

This single shot tray is well made and sturdy. It fits in the breech quite well. Pellets insert easily into the loading port and chamber easily.

This single shot tray appears to be made of a very durable polymer. I wouldn't change this. But I would like to have an aluminum or titanium one if this would work. Even at an a higher price point. But this single shot tray very good for what it is. And I wouldn't change anything about it.

Fits sort of

Ease of removal, access to insert pellet, ease to insert

Might look for different manufacturer for better design

Fits good, I bought this to see if it would make loading slugs easier, it did not lol. The stock mag doesn't line properly with slugs unless you smack the mag on its face to slide the slugs forward. I test slugs constantly so that was my motivation to get this.

It would be nice if the top was a little more open.

Loading slugs can be tricky

Seems made of durable material. Actually works in my Gamo Urban, with an issue. Value? I think it is pretty good for what you pay. Try finding ANY alternative for a closed top breech.

Better spec control, if possible.

This single shot tray hangs slightly on the bolt probe, I believe on the oring. If I put slight inward pressure on the left side with my thumb it works pretty good, not perfect. It is still a little hard to load a pellet correctly but I knew it would be. Put the barrel downward a bit to make the pellet drop in nose first. The bevel on this model has obviously helped but it still has a slight problem. Could be in the cooling process after molding. But, this rifle is not built to exact tolerances in the mag port either. It is totally possible this single shot tray would work just fine in another Gamo Urban.