*Some exclusions apply.
PY-A-2298
Item Code: MNT-DN034 [PY-A-2298]
Create an online review
1.0 1.0
1.0 1.0
Nice piece of hardware but did not work for my 1980 something model RWS DIANA 45 MODEL. Scope ran out of down adjustment before it could be zeroed. I actually turned it around backwards and it worked better that way. Now had to use quite a bit of upward adjustment but i was able to get it zeroed in.
Things I would have changed:In description, it should let RWS DIANA model 45 owners know that droop compensation may be to much depending on which model year thier gun is.
5.0 5.0
5.0 5.0
fixes barrel droop on Diana 34 22 cal
Things I would have changed:nothing
What others should know:Bought a new Leapers 4-12 scope that was set at factory Zero . Using a leapers mount it shot 17 inches low at 30 yards and 3 inches left. As I did not want to try to adjust that much drop on a new scope so I bought this base and a set of weaver bases . Now it shoots 3 inches high at 30 yards , 3 inches right and is in my comfort zone of scope adjustability
Got a question or answer?
Log in to participate
Wondering if anyone can tell me what it says on the other side for numbers. I am reading reviews for the Gamo Swarm and this what they used to replace the scope. Wondering cause it says in only fits RWS rifles and if this is the same mount. Thanks in advance http://hardairmagazine.com/wp-content/uploads/2017/05/Swarm-Bugbuster.jpg
The description says 20.1" at 30 yards. At 10 yards that is about 7". There is also one with half this much droop correction. Another one that has 30" at 30 yards doesn't have a front lobe. Even if bore an scope center adjustment are parallel will probably need the 10"@30yds to correct for this. Cutting the front lobe off will allow the small scope to be moved further back for a more correct placement. There are also cantilever mounts that hang the scope further back for correct scope placement. Then correct for scope alignment by schrimming. All in all better to use a full sized scope.
is this the mount for my 350 mag?
What are the numbers on the top of the rail for (02, 04 .. 10, 12)?
In-stock
UTG 1" Max Strength Quick Lock Rings, High, Weaver/PicatinnyIn-stock
Leapers Accushot 1" Rings, Medium, 3/8" Dovetail, 4 Screws/CapOnly 4 left in stock
UTG Pro US Made 30mm Rings, Medium, POI PicatinnyOut of Stock
Estimated in-stock date 07-22-24
Out of Stock
Estimated in-stock date 06-02-24
Only 5 left in stock
Beeman Notched Trigger Unit, Fits Beeman HW70 & HW70A Air PistolsRAW Rapid Air Worx HM1000x LRT Blue
Gamo Match .177 Cal, 7.56 Grains, Wadcutter, 500ct
Only 1 left in stock
Walther Air Cylinder, Integral Gauge, Aluminum, Fits LG300 & LG400 Air RiflesOut of Stock
Estimated in-stock date 06-02-24
Buy With Confidence
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
We work hard to get all orders placed by 12 pm EST out the door within 24 hours on weekdays
because we know how excited you are to receive your order.
Weekends and holiday shipping times will vary.
During busy holidays, we step our efforts to ship all orders as fast as possible,
but you may experience an additional 1-2 day delay before your order ships.
This may also happen if you change your order during processing.
View Shipping Times
It's important to know that due to state and local laws, there are certain restrictions for various products.
It's up to you to research and comply with the laws in your state, county, and city.
If you live in a state or city where air guns are treated as firearms you may be able to take advantage of our FFL special program.
U.S. federal law requires that all airsoft guns are sold with a 1/4-inch blaze orange muzzle
or an orange flash hider to avoid the guns being mistaken for firearms.
View Shipping Restrictions
Get the most out of your equipment when you work with the expert technicians at Pyramyd AIR. With over 25 years of combined experience, we offer a range of comprehensive in-house services tailored to kickstart your next adventure.
If you're picking up a new air gun, our team can test and tune the equipment before it leaves the warehouse. We can even set up an optic or other equipment so you can get out shooting without the hassle. For bowhunters, our certified master bow technicians provide services such as assembly, optics zeroing, and full equipment setup, which can maximize the potential of your purchase.
By leveraging our expertise and precision, we ensure that your equipment is finely tuned to meet your specific needs and get you ready for your outdoor pursuits. So look out for our services when shopping for something new, and let our experts help you get the most from your outdoor adventures.
View Service Info
Shop and purchase with confidence knowing that all of our air guns (except airsoft) are protected
by a minimum 1-year manufacturer's warranty from the date of purchase unless otherwise noted on the product page.
A warranty is provided by each manufacturer to ensure that your product is free of defect in both materials and workmanship.
View Warranty Details
Didn't get what you wanted or have a problem? We understand that sometimes things aren't right and our team is serious about resolving these issues quickly. We can often help you fix small to medium issues over the phone or email.
If you need to return an item please read our return policy.
Learn About Returns
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
Want More?
Join Our Email List for News and Deals!
Join the Pyramyd AIR mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!
Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!
* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.
By Thomas
5.0 5.0
5.0 5.0
I have a Mod. 36 made in 1998 that has lots of droop. This was a perfect solution to that issue. Works like magic. This gun has always been very accurate, now my scopes don't need shims.---HOORAY
Things I would have changed:nada
What others should know:low to med. rings will work better than high ones for the most part, unless you get the UTG scope with 53mm obj. lens.