Air Venturi Air Bolt: Part 2

by Tom Gaylord
Writing as B.B. Pelletier

Air Venturi Air Bolts
Air Venturi Air Bolts turn a .50 caliber big bore into an air bow.

Part 1

This report covers:

  • Power!
  • Broadheads
  • Velocity
  • Accuracy
  • Penetration
  • More to come

Today we take our second look at the Air Bolt from Air Venturi. I may not have written much about it, but I have been demonstrating it to the public and shooting it much more, since the last report. Today’s look will be comprehensive, because I’m writing a feature article for Firearm News. This will be the material gathered from that testing.

Go back and read Part 1 to learn more about the Air Bolt. It’s an air bow system that you can own without buying a separate arrow launcher. If you already own certain .50 caliber big bores like the Sam Yang Dragon Claw 500cc rifle and the Wing Shot air shotgun, all you need are the arrows, or bolts as they are properly called. Instead of spending $900, you spend $120 for 6 bolts and you’re in business. And that’s not all! read more


Hatsan Gladius .177 long: Part 6

by Tom Gaylord
Writing as B.B. Pelletier

Part 1
Part 2
Part 3
Part 4
Part 5

Hatsan Gladius
Hatsan Gladius Long.

This report covers:

  • Big lesson!
  • Rings report
  • The test
  • Scope report
  • JSB Exact RS
  • Air Arms Falcon
  • H&N Baracuda Match with 4.50mm heads
  • H&N Field Target Trophy pellets with 4.50mm heads
  • Summary

Today is the final report on the Hatsan Gladius long air rifle. It is also an interim report on the UTG G4 8-32X56mm scope with that special illuminated half-mil dot reticle. And, by extension, I will be reporting on the new UTG POI rings, though it is difficult to make much of a report on rings. If they do their job they should be almost unnoticeable.

Big lesson!

There are three fundamental truths about airguns that I try to stress whenever possible. First — that a better trigger does not affect accuracy. Second — that a tuneup does not affect accuracy. And the third one is seen today — namely that a more powerful scope does not affect accuracy. We shall see. read more


BSA Meteor Mark I: Part 2

by Tom Gaylord
Writing as B.B. Pelletier

BSA Meteor
BSA Meteor Mark I.

Part 1

A history of airguns

This report covers:

  • Scope base
  • Breech lockup
  • Spend the money!
  • Velocity
  • Hobbys
  • RWS Superpoint
  • JSB Exact RS
  • Conclusions

I learned a lot from the comments to Part 1 of this report. Apparently a lot of readers are fascinated by the BSA scope that came as an option. I was asked several questions about how it mounts to the rifle, so let’s start today by looking at that.

Scope base

BSA cut two large dovetails into the spring tube. Then they pressed two steel inserts into these dovetails to create two hard mounting points for the scope ‘rings.’ I put quotes about the word rings because they aren’t rings at all. They are built right into the plastic scope body and as such they cannot be moved. Neither can the scope base oj the rifle be moved. So BSA gives you three holes to adjust the scope’s eye relief. read more


Sheridan Blue Streak: Part 3

by Tom Gaylord
Writing as B.B. Pelletier

Part 1
Part 2

A history of airguns

Sheridan Blue Streak
My Sheridan Blue Streak was purchased new in 1978.

This report covers:

  • Where are we?
  • A local repair
  • Test 1
  • Test 2
  • Test 3
  • Break-in required?
  • Test 4
  • Pump effort
  • Time to move on

Where are we?

This test was halted after Part 2, when it became obvious that my Blue Streak was in need of a rebuild. So I prepared to send it off after the Texas Airgun Show. But, while meeting with the people at the Arlington Sportsman Club where the show was held, Jeff Cloud told me he was repairing multi pumps and asked me if I wanted him to have a go at mine.

A local repair

I was going to ship it to Rick Willnecker in Pennsylvania, but Jeff seemed confident and I told him all I wanted was to bring it back to spec — no hot-rodding. I gave him the rifle at the show on August 27 and got it back when I returned from the Pyramyd Air Cup. read more


Hatsan Gladius .177 long: Part 5

by Tom Gaylord
Writing as B.B. Pelletier

Part 1
Part 2
Part 3
Part 4

Hatsan Gladius
Hatsan Gladius Long.

  • Back to the Hatsan Gladius
  • POI rings
  • Ring fit
  • Assessment of the POI rings
  • My new glasses
  • The scope
  • Sight-in

Back to the Hatsan Gladius

Today I revisit the .177-caliber Hatsan Gladius long that we have looked at 4 times already. I’m going to use this rifle to mount the new UTG G4 8-32X56 scope in those special UTG POI rings. This report will focus more on mounting the new rings and scope and sighting-in at 25 yards. There will be an additional report with this setup on the 50-yard range.

POI rings

The POI rings I am installing are medium height, which would be a problem because of the large scope objective bell, if not for the riser base in the Galdius. It seems perfect for these rings. I will show you after the scope is installed. read more


2016 Pyramyd Air Cup: Part 2

by Tom Gaylord
Writing as B.B. Pelletier

Part 1

This report covers:

  • The matches
  • Field target
  • Strange airgun
  • Fun guns
  • Air Bolt
  • Rockin’ rat target
  • The end

The matches

Let’s get right to it. The Pyramyd Air Cup is a series of airgun matches, with field target being the premiere sport, followed by the Pyramyd Gunslynger and then the Pay Day Challenge. The Pay Day Challenge is first and the $200 prize gets everyone in the mood for competing. It’s a total of 10 shots at field targets with sighted-in rifles provided by Pyramyd Air. Five shots are at 40 yards off a benchrest with an HW S100 PCP rifle. Then 3 shots offhand at 25 yards with an Air Arms S200 FT, and finally 2 shots offhand at 15 yards with a Condor. All targets have 1.5-inch kill zones. read more


2016 Pyramyd Air Cup: Part 1

by Tom Gaylord
Writing as B.B. Pelletier

This report covers:

  • You don’t have to compete
  • My eye
  • Bubble level!
  • New Bug Buster
  • Speaking of scopes…
  • Fun stuff
  • More to come!

I attended all three days of the 2016 Pyramyd Air Cup last weekend and got to meet a number of blog readers from around the nation. Oddly, some of the readers who live only a few hours away from New Philadelphia, Ohio, did not make the trip. That surprised me. I don’t think they realized all the advantages of attending.

You don’t have to compete

You can attend the event without shooting in any of the events. In fact, a lot of people might like to do that even more, because while most of the crowd is on one of the courses, you get to monopolize the time of the vendors and look at everything they brought to display and sell. Just a for instance — Pyramyd Air brought out some guns that were in their back room — guns like an older Beeman Webley Tempest pistol. The people not shooting in the Cup had the chance to buy these things, and many of them did. read more