Blog
by Tom Gaylord Writing as B.B. Pelletier SigAir Super Target (photo provided courtesy Sig Sauer). Part 1 Part 2 Part 3 This report covers: Adjusting the trigger — first Adjusting the trigger — second Accuracy The test RWS Hobby Let’s examine that group Hobbys again Sig Match Pb RWS R10 Match Pistol H&N Finale Match … Read more
by Tom Gaylord Writing as B.B. Pelletier Sig Air Super Target (photo provided courtesy Sig Sauer). Part 1 This report covers: Storage The latch for the top strap Valve and hammer Dry-firing Velocity — Sig Match Pb pellets Sig Match Pb Cocking and pumping behavior RWS Hobby Sig Match Ballistic Alloy Can it go faster? … Read more
by Tom Gaylord Writing as B.B. Pelletier Sig Sauer MPX. Part 1 This report covers: How to load the MPX Orient the magazine by the magazine door Removing the belt Load the belt Feeding the belt into the magazine Sig Sauer Match Ballistic Alloy pellets Crosman SSP pellets Air Arms Falcon domes Does firing fast … Read more
by Tom Gaylord, a.k.a. B.B. Pelletier Part 1 Part 2 The See All Open Sight is revolutionary! Today, I’m testing the See All Open Sight on the new TX200 Mark III that I’ve been testing for you. Because that rifle figures into today’s test so much, I felt it was important that you be able … Read more
by B.B. Pelletier Just a couple notes before I turn it over to Chuck. First, I do not answer questions send to me at the blogger address. I want all questions to come through this blog, if possible. Second, I’m off to New York today for a week of filming the TV show. Be back … Read more
by B.B. Pelletier Guest bloggerThis is CJr’s first guest blog for us, although he’s already been very active and helpful by contributing to the blog comments. As many of you know, the IZH-61 is a rifle that any shooter can appreciate and enjoy, and CJr shows us some ways to modify the its open sights. … Read more
by B.B. Pelletier Before we begin, I will be out of town today and tomorrow, so I’m asking you veterans to watch the comments for me. I’ll start answering when I return this weekend. Guest bloggerVince rebuilt a Markham gun for Wayne, another blog reader, and here’s the third part of that project. If you’d … Read more
