BSA Stealth Tactical Dot Sight with laser and tactical flashlight: Part 1

by B.B. Pelletier

The BSA Stealth Tactical Dot Sight is a sexy-looking unit!

And now for something completely different. It’s not an airgun at all, but an optical sight system with a lot going for it! The BSA Stealth Tactical Red/Green/Blue Dot Sight with tactical flashlight and laser is a unique optical sight that gives more sighting options with greater innovation than I have ever seen. I will try to do it justice in this report.

It’s not cheap
The price of $136 is bound to put off a lot of potential buyers, but perhaps if I tell the whole story some will look a second time. And, a second look is warranted, for this is no bargain-bin dot sight. It’s a well-engineered system, containing a dot sight with three different-colored dots, a laser and a tactical flashlight in one comprehensive package. And, speaking of the package, let’s begin there, because the box this thing comes in is enough to warm the hearts of most shooters.

Ammo can
Inside the heavy card lithographed box is a metal container styled like a military ammo can. If you’ve ever served in a military organization, this container will seem familiar, because the military often packages expensive field equipment in rugged containers like this. The can opens like any ammo box ever produced, revealing the sight and its supporting parts inside. I know I would have lots of uses for that container after the sight was mounted on a gun.

The sight comes packed in a padded metal ammo can.

The sight is a unitized cluster that contains a three-color dot sight, a tactical flashlight and a red laser. The flashlight and laser run on button batteries, so don’t use them indiscriminately. They are there to be used, but the batteries don’t have the life of the much larger CR123A batteries found in standalone units.

Weaver base required
The unit includes an integral Weaver mount with locking crossbars to prevent movement under recoil. Factor that into your purchase plans. Because I’m still recovering from a hernia, I plan to test the sight on an AirForce Talon SS that has an 11mm to Weaver adapter, but the sight would also work perfectly on one of the new Benjamin Trail-series rifles that has a Weaver base built in. If I could cock a springer, I would have tested it on a benjamin Trail rifle that has the Weaver base built-in.

What is a dot sight?
A dot sight is like a scope, but with a few important differences. First, most dot sights do not magnify the target at all. Because they don’t, they have a wide field of view that’s well-suited to the quick acquisition of a target. Hunters love them for that.

Dot sights are similar to scopes, but instead of a vertical and horizontal crosshair they use a single dot located in the center of the optical package. The dot represents the intersection of a vertical and horizontal reticle. The motion of the erector tube moves the dot around so the sight can be zeroed, the same as it does for a scope. The dot is visible only inside the sight. No one other than the shooter can see it. It doesn’t project outside the unit like a laser light beam. A laser is like a flashlight with a coherent light; a dot sight is like a scope but with a dot instead of a crosshair.

Multiple colors
Dots can be any color, and by changing the color they may be more visible in certain light situations. This device has a choice of three different colors — red, green and blue. A single rotary knob lets you select the color you want and vary the intensity. The intensity is important because, as the dot gets brighter, it appears to grow in size. The larger it is, the less precise when aiming. With the BSA sight, each color has three levels of intensity, and there’s an “off” position between each color. As the knob is turned, you get a light in three levels, followed by an off, then a different color light followed by another “off” and so on. The knob can be rotated completely around without stopping.

Lens covers
The BSA sight has a unique set of lens covers, front and rear. They’re built right into the unit, so there’s nothing to lose or carry separately. Simply twist the outer ring on both ends of the sight, and an iris opens and closes to protect the lens. I like the convenience of this kind of lens cover, and I wish scopes had it, too.

The integral iris lens covers are always with the sight and never get in the way. I really like them!

The laser
Why put a laser on a gun? Well, it can be used as a close-range sight of sorts. You can align where the laser shines to where the pellet strikes and have a quick means of sighting. Simply put the dot on a target and pull the trigger. There’s been so much use of this in movies over the past 20 years that I don’t need to elaborate further.

To make this possible, you have to adjust the laser to the point of impact, and that can be a difficult thing to do. I’ll test this aspect of the sight in my report. I’ll attempt to adjust the laser to be on target at 10 yards, which is a perfect distance for it. You use a laser in conjunction with an optical sight by adjusting the laser for ranges at which the sight is not adjusted. So, I’ll zero the dot for a 20-yard first point of impact and the laser for a 10-yard had zero. In other words, the pellet will not be zeroed at any range other than 10 yards. That way, I’ll have the gun zeroed from about 8 yards out to 40 yards, because the amount the pellet will be off-target at the interim distances (the non-zeroed distances of 10 yards, 20 yards and perhaps 34 yards) will be a negligible pellet’s diameter away.

The tactical flashlight
This feature seems less valuable to me than the laser. I understand it’s there for the coolness factor, and that in a combat or tactical law enforcement situation a flashlight may be just the thing you want. For a hunter, it’s less useful. Yes, hunters need flashlights, but they don’t need flashlights that operate on button batteries and have a useful life of an hour or less. I’ll test this to find out what the life really is, because there’s no literature that comes with the sight. You need a flashlight that works with a beefy CR123A battery, so you have sufficient illumination time. Still, it’s there and I’ll test it.

Do we need a unit like this? Well, that’s more up to the individual shooter than it is to writers like me. To the man who wants a good dot sight for hunting, if this is a good one then, yes, he needs it. To the man who calculates the pennies he spends on pellets, I’d say this sight is a bit too pricey. Other dot sights might satisfy his itch just as well. I’ll be testing it for functionality, not for its “worth,” which only you can define.

Remote cables
You need remote switches to operate a sight like this. There are switches on the unit that can turn it on and off, but for the laser and flashlight there are also coiled cables that allow you to position a pressure-sensitive thumb switch to a spot on the gun stock where it’s more convenient to operate. It’s your choice to use the cables or the switches that come on the unit.

You can install these remote cables anywhere you like on your gun. They make operation of the laser and flashlight faster and easier.