by Tom Gaylord, a.k.a. B.B. Pelletier
This report addresses:
• Identifing and lubricating high-stress parts
• Lubricating with moly
• Lubricating triggers
• Lubrication intervals
• Lubricating mainsprings
• General lubrication
• Preserving the airgun with oil
Well, the immediate response we got to the first installment of this report made it one of the all-time favorites. In that report, we looked just at the piston seal, which I said was half of the lubrication solution for a spring gun. Today, we’ll look at everything else.
Parts under high stress
The moving parts of a spring gun are the powerplant parts, the trigger group and either the barrel, when it’s used as to cock the gun, or the cocking mechanism if the gun isn’t a breakbarrel. When airguns were simpler and less stressed, all of these parts could be lubricated with gun oil or lithium grease. But today’s guns are stressed to higher limits and generally need something more specific and better-suited to each application.