Has anyone had this F12 foster quick disconnect show up pluged solid through the middle?
Manufacturing errors do occur. Contact Pyramyd air customer service for a replacement.
Is this an 8mm to 8mm connector?
This is the size F12 foster. Standard in US foster connectors. All the Fosters we sell are F12.
Is it a single direction? Or is it just open from either end?
It is open thru both ends.
Hi can I refill my Air Venturi Carbon Fiber Charging Station, 4500 psi, 98 cu ft from my YONG HENG air compressor with this fitting? thanks
If the compressor hose ends in a female QD, then yes.
Hi can I refill my Air Venturi Carbon Fiber Charging Station, 4500 psi, 98 cu ft. FROM Air Force E Pump Compressor in the future With this fitting. Thanks.
Yes, this should be what you need. Hard to say for certain since the compressor is not out yet, but the samples we've seen would require this to fill your tank.
Could it be used for quick connecting the Bemjamin Hand Pump (PY-A-2222) and the Hatsan AT44 10 Tactical PCP Air Rifle?
No. You need Air Venturi Male Quick-Disconnect, 1/8"...
I have a gamo coyote .22 caliber pcp and a scuba tank with a air venturi foster female quick disconnect 1/8 inches. Can I use this one to charge from my existing connection to the gamo coyote connection? [email protected]
No. You would want Air Venturi Male Quick-Disconnect, 1/8"..., that will attach to your Gamo Fill probe and allow it to connect to the female foster on your fill assembly.
Can this be used between my Air Ventura g6 hand pump and my Benjamin 4500 psi carbon fiber air tank too top off my tank ? They both have the female quick disconnect on the pump and tank hoses. Like what goes onto a Benjamin Marauder to fill its cylinder. Thank you for anyone who can help me with this.
Will this fit a Sumatra lever action air rifle
Is this made from Stainless or steel and where is it made?
It's stainless steel and made in the US
What is the pressure rating of this fitting?
It is made of stainless steel and rated for 5K