Date: 29/10/2020 12:5

Customers Q&A on Air Venturi EC-3000 Compressor by Hill


Out of Stock

Got a question? Got an answer?
Log in, then enter your text.

  • Reynold from USA asked:

    Will this compressor fill a Great White 550 Cu In/97 Cu Ft 4500 PSI Tank

    • Mark from USA:

      It is not recommended to fill CF tanks from the Hill compressor.

  • jesse from USA asked:

    According to the Air Venturi rep this is for filling guns only. I also have read that it will fill tanks also, which is correct?

    • Mark from USA:

      The hill compressor should be used for filling guns only.

  • JPM from USA asked:

    How long is the warranty? I can't find that info anywhere.

    • Mark from USA:

      1-year limited warranty

  • Paul from USA asked:

    I read the on line owners manual and it talks about maintaining two different oils, and not to mix the two.

    • Paul from USA:

      Thank you that's what i wanted to know.

    • Mark from USA:

      They come with the unit. One is crank case oil, the other is silicone lube/oil

  • Paul from USA asked:

    Would you list the correct lubes to order along with this pump. I'd hate to order the wrong type lubes and wreck the pump right off the bat.

    • Mark from USA:

      Any 100% silicone oil can be used as lubricant. It can be sourced at hardware stores. treadmill lube on amazon etc.

  • John from USA asked:

    Please give a specific date of In Stock..everytime I look here,date just gets pushed out by a week? I need compressor asap,this looks ideal ..thank you

    • Mark from USA:

      At this ti,e we do not have a hard in stock date.

  • daniel from USA asked:

    For filling tanks or just rifles?

    • Mark from USA:

      The Hill compressor will fill air tanks and rifles/pistols.

  • Paul from USA asked:

    There seems to be a discrepancy between the weight listed in the description (55 lbs) and the weight listed in the Specifications (27.22 lbs). Can you please share the actual weight of the compressor?

    • Mark from USA:

      the 27.22 figure should be kilograms. approx 55 lbs.

  • Paul from USA asked:

    Will the Hill H8000 Oil and Hill Silicone Oil needed for maintenance of this compressor be available for purchase through Pyramyd Air?

    • Mark from USA:


  • JoJohn from USA asked:

    When will this be available

    • Mark from USA:

      We are expecting the Hill compressor to be instock by late spring to early summer.

  • Steve L. from USA asked:

    Does the EC-3000 use rubber compression o-ring seals similar to the Hill hand pumps? If so, are they meant to be owner serviceable?

    • Mark from USA:

      We have not seen any internal drawings or extended use of the prototype.

  • piotr from USA asked:

    when this compressor will be available

    • Mark from USA:

      We will have the Hill compressors in stock in the near future. We do not have a hard date yet.

  • TUAN from USA asked:

    How long does it take to fill a 90cu in. carbon fiber tank? Please have specs on filling tanks would be helpful.

    • Mark from USA:

      We have not had a example to test. We will have fill times in the near future.

  • mike from USA asked:

    Is the compressor designed to fill large SCBA tanks?

    • Cary from USA:

      The manual says 4L (244 cubic inches) is the max recommended

    • Mark from USA:


  • James from USA asked:

    can this be used to fill a 4500 psi 74 cubic foot tank

    • Mark from USA:


  • Chris from USA asked:

    Will this be able to fill up air venturi tanks as well....

    • Mark from USA:


  • Harry from USA asked:

    How many amps does this compressor draw?

    • Mark from USA:

      We do not have that information yet. We will shortly.

  • Dominic from USA asked:

    What are the dimensions of this compressor? (Height, length, width and weight)

    • Mark from USA:

      We currently do not have that information. The website will be updated with all the specifications shortly.