Date: 27/1/2021 21:12

Customers Q&A on Air Venturi Female DIN Adapter, 1/8" Male BSPP Threads, Stainless Steel

Add to Cart


Got a question? Got an answer?
Log in, then enter your text.

  • Christopher from USA asked:

    Is there height enough for this adapter to fit directly on to a MK4 Hill Pump?

    • Mark from USA:


  • Michael from USA asked:

    Is this the correct adapter to connect a Hill Mk 4 pump to the DIN 200 adapter included with the T200 rifle?

  • Vaibhav from India asked:

    Is this can be used in Steyr Evo 10

    • Tyler from USA:

      Yes, it will attach to the fitting that comes with the steyr, but it depends on what you are attaching that to

  • Domingo from USA asked:

    Is this the thing that connects to the Hill mk4 pump If you fill hpa to a walther maximathor pcp?

    • Tyler from USA:


  • Domingo from USA asked:

    Is this the one needed as an adapter to a walther maximathor if you use a Hill hand pump ?

    • Tyler from USA:


  • Robert from USA asked:

    Is the 1/8" male BSPP the same as CGA 347? I was told that most SCBA carbon fiber tanks use a CGA 347 valve and you need a CGA 347 to Din 300 adapter to get the 4500 psi scba tanks filled at most US dive shops.

    • Stacey from USA:

      1/8" bspp is different than an SCBA valve thread. Plus, SCBA valves have male threads. I would put an SCBA tank adapter assembly with hose and female qd (AV-000027 [Air Venturi Tank Adapter Assembly,...]) on the tank for filling guns and then you can fill through that hose using AV-00044M at a scuba shop

  • Hemn Mahmmod from Albania asked:

    i think this is what we need to refill the 88cu air tank?? isn't it?

    • Cory from USA:

      To fill the 88 cf tank with a din style you would need to add a foster quick disconnect or get Air Venturi SS Female DIN..., but this would all depend on how you are filling as the tank already has a foster style fitting.