Date: 18/12/2018 9:14
0

Customers Q&A on Air Venturi G6 Hand Pump, 4500 PSI

Got a question? Got an answer?
Log in, then enter your text.

  • Carlos from USA asked:

    Can this pump be used to Air Venturi Tank With Stock & Adapter, 13 cu in, Aluminum, 3,000 psi.

    • Stanley from USA:

      Yes it can .

  • danny from USA asked:

    can this hand pump fill a Sumatra 2500?

    • Stanley from USA:

      Yes it can take at least 110 pumps for 10 rounds at least from my 25 caliber Sumatra? Great rifle.

  • Greg from USA asked:

    Can this pump be used to fill hatsan at44 ?

  • Russell from USA asked:

    Where is the Intake on this pump? The Benjamin, airforce, and Hill all have accessible intake ports near the bottom. In short, Can this pump be boosted? (Not asking if I should, only if I CAN)

    • philip from USA asked:

      Used this pump for the first time today to fill Sam Yang Recluse. It took about 400-500 pumps to get from 1,000psi to about 2,500psi ? Did not hear any air leak from pump or gun. This seems like a lot work. I am 180 lbs and in good shape. Am I doing something wrong or is this normal ? I hate to think I have to go through this for a few decent shots !

      • Tyler from USA:

        Sounds like a problem to me

    • Hance from Trinidad and Tobago asked:

      Hello, will this pump work on an Evanix Max Bull-Pup or are adapters required to be used ? Thanks in advance.

    • Jay from USA asked:

      Hi guys what's everyone using for lubricant on the outside cylinder? I've been using pure silicone drops. If this is the best lube how much and how often should I apply? Thank in advance??????

      • Tyler from USA:

        Hill pump grease would be suitable. Just apply a thin layer, re-apply when you can't feel it on the pump cylinder any longer.

    • Dr. Sidharth S. from India asked:

      I have a Steyr LG110 Match 2012 make. What addapter shall i be needing?

      • Tyler from USA:

        If you do not have the cylinder with the quickfill and you remove your cylinder from the gun, you will need the brass adapter that came with your gun and this fitting: Air Venturi SS Female DIN...

    • Domingo from USA asked:

      What is the included grease in the air venturi pump? Is that for the o- rings inside? Is it safe to use that grease on the o- rings of the nipple or was it called the "needle for charging air. for the rifle?

      • Stanley from USA:

        A spanner wrench , maintenance grease , 5 rebuild kits . The grease included is only for rebuilding , and maintenance of the pump .

    • nathaniel from USA asked:

      Come with a moisture filter?

      • Stanley from USA:

        Yes per description .

    • Nathan from USA asked:

      Will it work for a straight from the factory .45 Sam Yang Light Hunter? Or do I need a adapter to use it?

      • Tyler from USA:

        The new production Sam Yang's are coming with a QD fitting, so yes. If you have an older model though with the fill probe, then you will need a male adapter (PY-A-3550) for the probe.

      • Stanley from USA:

        You will need the Air Venturi Foster Male Quick Disconnect Adaptor.

    • nathaniel from USA asked:

      Is this a good product I see a bunch of mixed reviews on this.

      • Tom from USA:

        I Bought this pump thinking that I am in good shape and will not mind pumping, I was being cheap more than anything. I fill my Condor up to 2800psi. I quickly learned that I am more lazy than I thought and bought an SCBA tank and an Omega supercharger. The pump works. PCP airguns are expensive on the startup.

      • Stanley from USA:

        Personal choice i guess ? i bought the Hill Pump . Ive read those reviews to and made my choice.

    • Steven from USA asked:

      What is the size of the quick disconnect, is it a one eigth bspp?

      • Stanley from USA:

        Yes.

    • Steven from USA asked:

      Will this Connect to the "Big Bore" .45? Or do I need an adapter?

      • Stanley from USA:

        Airforce Texan ? Yes no adapter needed .

    • james from USA asked:

      What, if any, adapters are required for the ataman M2R carbine? Will this pump fill the rifle to full pressure, and how long would that take me?

      • Val from USA:

        Please use PCP Hookup tab on the air rifle page to check if you need any adapters

    • Patrick from USA asked:

      This is a recommended accessory for the upcoming Hatsan Gladius. (which I certainly want) Has it been verified compatible? Does it need an adapter? Thanks.

      • Val from USA:

        Please use PCP Hookup tab on the air rifle page to check if you need any adapters

    • Juan Carlos from Mexico asked:

      will this fit the sumatra 2500 right out of the box? or which adapters would i need?

      • Val from USA:

        Please use PCP Hookup tab on the air rifle page to check if you need any adapters

    • hunter from USA asked:

      do u have to put it together

      • Val from USA:

        Just the foot plates

    • hunter from USA asked:

      can u use this on a hatsan at44 10 qe long

      • Val from USA:

        yes. Please use PCP Hookup tab on the air rifle page to check if you need any adapters

    • James from USA asked:

      Can you use this on the air force escape

      • Stanley from USA:

        Yes.

    • naim from USA asked:

      i pump my sumatra with the pump but when i bleed it the air came out but when i used my scba tank the air remain could some one tell if the pump have a problem or if it the valve on the gun

      • Tyler from USA:

        Sounds like the fill port check valve sticking. Might want to try bleeding the pump faster next time. Or point the muzzle towards the ground and then bleed it, let gravity help close the check valve.

    • naim from USA asked:

      I have and air venturi 6g hand pump 4500psi I pump my sumatra air rife but when I bleed the pump all the air from the gun comes out but when I fill in with my scba tank the air remain in the gun could some one tell me if the pump is the problem or the valve on the gun is the problem thanks

      • Tyler from USA:

        See the answer above

    • David from USA asked:

      What about moisture? The owners manual for my Beeman HW 100 (an amazingly accurate air rifle) warns that moisture from hand pumps will damage the cylinder over time, so recommends using SCBA tank air only. I know the pump has a "moisture filter" in the base, but it is not visible or easily replaced, so it seems to me it cannot be very robust. I would be more comfortable with an-add on intake attachment for a more robust (and possibly replaceable) moister removal device... I have this pump, and would be happy with this other than that concern.

      • Tyler from USA:

        Just make sure you take breaks as you pump so the moisture does not have a chance to accumulate. You could add an inline dessicant filter, you'd just need to find one that can attach to a QD fitting.

    • joseph from USA asked:

      Can you a desiccant filter to this pump

      • Tyler from USA:

        There is not such an upgrade available

    • Christian from USA asked:

      Is there a way to put in my filling adapter for my walther lg400 competition?

    • Scott from USA asked:

      Will this work on the Air Force Escape?

      • Tyler from USA:

        Yes

    • Alex from USA asked:

      Hi!...how relible is the pump's pressure gauge? Cause the evanix sniper gauge shows 200 bar while the pump's gauge shows only 175...

      • Mark from USA:

        It's oil filled gauge, and works pretty good (does not feel cheap, is not plastic, full metal)

    • Harish from USA asked:

      Can I use this to pump Hatsan BT65 Elite Airgun

      • Mark from USA:

        yes

    • John from USA asked:

      Will this fill a marauder faster than the Benjamin hand pump?

      • Mark from USA:

        yes

    • john from USA asked:

      can I use this pump on my Quackenbush .458 outlaw rifle ?

      • Tom Gaylord from USA:

        Can it fill an Outlaw? Yes. Do you want to? Probably not. You would pump for 15 minutes (with rest breaks) to shoot 2-3 shots.

    • john from USA asked:

      will it work with the Quackenbush .458 outlaw

      • Mark from USA:

        yes

    • Alejandro from USA asked:

      is the Air Venturi G6 Hand Pump for anshuts air rifle?

      • Val from USA:

        You can use it with Anschutz air rifles, but you will need the right adapter. On the rifle page, click PCP Hookup and choose this pump to see what adapter you need.

    • Dan from USA asked:

      I'm going nuts pumping up an armada, on the down stroke air escapes out the top of the pumps cylinder is this normal. it seems to be staying at 1000psi. I'm 6'4 300 lbs. help

      • Christopher from USA:

        Dan, I have similar issue. Between the two screw holes on the top of the stem, is there a hole? I have an o-ring around a little hole but there's nothing there.... Air seems to come out when I push the pump downwards.

    • Brian from USA asked:

      Will this pump work with the Crosman Silhouette,Benjamin Marauder PCP Pistol, and the Benjamin Disco.

      • Tyler from USA:

        Yes

    • MAURICE from USA asked:

      Will this work with my male foster fitting. And does it come with a rebuild kit? Last question. My Mrod P12 is rated at 3000psi. Will a pump rated at 4500psi fill up my gum faster?

      • Tyler from USA:

        Yes, it will work with a male foster QD fitting. It does come with rebuild parts. And no, the pump does not fill faster because it is rated to fill to a higher pressure.

    • ivan from Chile asked:

      can be used Sumatra 2500 500cc Reservoir and accessories need more ??

      • ivan from Chile:

        pump I'll compar is Air Venturi G6 Hand Pump, 4500 PSI and A- 3550 PY- adapter will work for 100% used in the Sumatra

      • Val from USA:

        With this adapter Air Venturi Male Quick-Disconnect, 1/8"... it can be. Just click on the PCP Hookup tab for the gun you want to buy or check and then select the pump of choice to see if there are any adapters you will need.

    • jordan from USA asked:

      Does this work with the Sam yang dragon claw?

      • Val from USA:

        yes, just click on the PCP Hookup tab for the gun you want to buy or check and then select the pump of choice to see if there are any adapters you will need.

    • rong from USA asked:

      Is the test plug available separately. I would like to get one to keep my pumps connector clean and test for leaks .

      • Val from USA:

        sorry, no

    • henry from USA asked:

      Does it attach directly to the gun's air tank? If so, how many pumps to fill a 290cc gun like Evanix?

      • Val from USA:

        it has a quick disconnect adapter. If ever in doubt on either it will hookup with your guy, just use the PCP Hookup tab to check what/if any connectors you need to connect gun with the pump/tank/compressor.

    • Benny from USA asked:

      can you keep a condor top off fairly easy with this pump?

      • Val from USA:

        yes

    • Greg from USA asked:

      Does the G6 have a dry pack feature or can one be attached?

      • brad from USA:

        It has moisture filters

    • Ronald from USA asked:

      How long would it take to fill a 75 cu tank

      • Thomas from USA:

        Just received my pump and my 75 cu ft tank was sitting at 4000 psi. I'm 160 lbs and could not budge the handle. On the other hand, it filled my Cricket from 260 bar to 300 bar rather quickly!

    • Thomas from USA asked:

      Would this fill my 75 cu ft tank to ~4500psi?

      • Val from USA:

        yep

      • Thomas from USA:

        Yes, I realize it'd be a lot of pumping, but is it possible?

    • ahkell66 from USA asked:

      Does it fit a Marauder?

      • Alex from Canada:

        I dont know why it wouldnt.

      • Val from USA:

        yes it does.

    • Alex from Canada asked:

      Why 5 times for rebuilt. Is it the spares included or is it for safety reasons. Important to answer that question

    • Ian from USA asked:

      Why do you say it can be rebuilt 5 times? Is that the number of spares included with it? I ask because I have rebuilt my benjamin pump more than 5 times.

    • rong from USA asked:

      is a moisture filter available?

      • Tyler from USA:

        There is a moisture filter internally, if you were to need a replacement down the road, you can call Pyramyd and get them.

    Navigation