Home
Questions & Answers

Customers Q&A on Air Venturi Scuba Tank Yoke K-Valve Adapter & Hose Assembly, 1/8 BSPP Threads

Add to Cart

In-stock

Got a question? Got an answer?
Log in, then enter your text.

Durwood from USA asked:
Will this work to fill my Benjamin Bulldog .357 directly from a typical rental SCUBA tank? If not and needs to be adapted, what adapter do I need it between the SCUBA tank joke and gun?
- Tyler from USA:
  Yes, this will fit a Scuba tank with a K valve (which is most of them). You will want Air Venturi Foster Female Quick-Disconnect... to fit the QD on the gun
Gary from USA asked:
Will this work with the Diana Stormrider?
Eduardo from USA asked:
Can I use this on a Evanix Sniper?
Ryan from USA asked:
Will Air Arms Fill Adapter thread on to this hose?
- Tyler from USA:
  Yes it will
Randall from USA asked:
Does this work with a Benjamin marauder PCP
- Tyler from USA:
  It can be adapted to work with it. You would need to add a female QD fitting to the end of the hose. This is the one: Air Venturi Foster Female Quick-Disconnect...
Wayne from USA asked:
Do I need an additional adapter for this on a Sam Yang Dragon Claw? Which quick connector might I need? Thx!
- Tyler from USA:
  If you have an older version with the fill probe, the probe will thread right into the end of this hose. If you get a current version with the male QD fitting on it, then you will need this adapter for the end of the hose: Air Venturi Foster Female Quick-Disconnect...
Youssef from USA asked:
Will this work on a Daystate Wolverine? do i need another part?
- Val from USA:
  As long as your Daystate probe ends with 1/8 BSPP male threads you should be OK.
Steve from USA asked:
Is this hose regulated? Mine only fills to 1500 lbs.
- Cory from USA:
  The hose is not regulated.
Howard from USA asked:
will this work on my Benjamin Discovery, is there a regulator down to 2000 psi
- Dan the Man from USA:
  You need part number Air Venturi Foster Female Quick-Disconnect... to make it fit to a disco. No, you just need to keep an eye on the disco's gauge.
Joe from USA asked:
How do I attach my Hatsan AT44PA fill probe?
- Dan the Man from USA:
  It threads on to it directly.
Richard from USA asked:
Air Venturi Foster Female Quick-Disconnect...
- Dan the Man from USA:
  Will allow you to hook up a male foster quick disconnect.
gerald from USA asked:
will I need an adapter for the scuba tank assembly to fill the maurader
- Tyler from USA:
  Yes you will need "PY-A-4926" (type that into the search bar). That will thread into the end of the hose and connect to the quick disconnect fitting on the marauder.