Date: 20/8/2018 6:39
0

Customers Q&A on Air Venturi Tank with Adapter, 13 cu in, Aluminum, 3,000 psi

Add to Cart

In-stock

Got a question? Got an answer?
Log in, then enter your text.

  • Bushman from USA asked:

    how long is it, tip to tail?

    • Tyler from USA:

      9.5"

  • Brian from USA asked:

    Can you put a different reg in it so you can use it to top off a airgun in the field? Maybe around 2600 psi out put.

    • Tyler from USA:

      Have not seen one available, but bear in mind that this is only about 200cc of air, most rifles have similarly sized or larger cylinders

  • Brian from USA asked:

    Can it be used to top of talonp or rainstorm while your hunting in the field.

    • Tyler from USA:

      Not, it does not output more than 1100 psi

  • Brian from USA asked:

    I would like to use the Benjamin 4500psi/90CU tank to fill this. Do you know how many cc the Venturi tank is and how many times it can be filled with the Benjamin 90CU. Do I need any special adaptors?

    • Tyler from USA:

      It's a little over 200cc, so you'd get about 6 full fills if you refilled at 1100 psi. And no, no adapters needed.

  • Gary from USA asked:

    what Burst pressure are the two burst discs set to? looks like one might be 5k psi?? cant see the other Burst disc PSI rating

    • Tyler from USA:

      3k I believe

  • Gary from USA asked:

    Can I use a, "Air Venturi Foster Female Quick-Disconnect" fitting, connected to a Hill mk4 Hand Pump to fill this tank? or do I need a different fitting?

    • Tyler from USA:

      Yes, that would work

  • Gary from USA asked:

    Are the O-rings for Regulator sold separately and what size and material are they?

    • Gary from USA asked:

      Is this regulator the same as the Ninja regulators meaning that it has Shims and beveled spring washers inside and by adding additional shims you can raise the regulator output PSI as along as you stay under the burst disc pressure? I want to put a gauge on the output and see where the output PSI is at, as i want a 1300psi output, I have seen the Ninjas output at 1050psi when the regulator says 1250psi

      • Tyler from USA:

        Yes, can be adjusted the same way.

    • walter from USA asked:

      Can I fill this with a Benjamin 90 cubic inch tank .

      • Tyler from USA:

        Yes

    • chris from USA asked:

      Can i attach this tank and adapter to the qb78 co2 cylinder. Thx

      • Tyler from USA:

        No.

    • victor from USA asked:

      does anyone know if this will fit a hammerli 850 if the stock is modified

      • Tyler from USA:

        It should if the stock is hogged out to allow proper clearance.

    • Daniel from USA asked:

      Is this tank compatible with the new Umarex Gauntlet? Can it be used as a spare tank to swap out ?

      • Tyler from USA:

        We won't know until the guns are available

    • Ken from USA asked:

      Can this be used with the evanix Rex p? Are there adapters for the conversion?

      • Tyler from USA:

        No

    • Michael from USA asked:

      Can this be used with the Umarex EBOS? Can it be used with the SIG Sauer MCX? If so, will it increase velocity vs. the 88 gram CO2?

      • Tyler from USA:

        Yes to both guns. And no, you won't see an increase in velocity

    • Michael from USA asked:

      I have a Hill pump. what adapter (female) do I use?

    • Kris from USA asked:

      Would this fit a Berretta CX4 with or without the buttstock attached?

      • Val from USA:

        No it will not.

    • frederick from USA asked:

      Would this work with a Hammerli 850 AirMagnum ?

      • Gary from USA:

        Reply's below say Yes!!! it will work with Hammerli 850

      • Val from USA:

        No, it will not

    • Michael from USA asked:

      Does this tank have a male DIN output? If so, will it be compatible with Air Venturi Female DIN Adapter,... ?

      • Tyler from USA:

        No

    • mlyons from USA asked:

      Will this tank fit or work on an AirForce Air Rifle? If so what adapter would be needed...

      • Tyler from USA:

        No

    • laurence from USA asked:

      Can you buy this in the uk

      • Quentin from USA asked:

        How will shot count roughly compare to 20 oz. bulk fill CO2?

        • Tyler from USA:

          It's a fair bit smaller. More comparable to the 88 gram CO2 carts, though this will do slightly more shots on most guns.

      • Quentin from USA asked:

        Will this fit on a Drozd Blackbird?

        • Tyler from USA:

          It will not fit into the space that is used to store the 88 gram cartridges on a blackbird. The rear frame of the gun would need to be removed to use this bottle on the gun.

      • Terry from United Kingdom asked:

        How much will this cost total including postage to the UK, or will tax be sorted USA side, or will it work out a ridiculous price this end once tax is paid.

        • Tyler from USA:

          That will depend on your shipping information specifically but tax would not be included on the US side. That is done once it arrives in the UK.

      • David from USA asked:

        Will this system work with crosman 2240/2400KT series air guns?

        • Tyler from USA:

          Depends on the exact set up. You'd either need an adapter in the front (if it bulk fills from the front of the tube) to drop the bottle down or run this as the butt stock in the back (If bulk filled from the back of the tube) and use the standard pistol grip (2240) and not the rear butt stock that is usually included on a 2400kt.

      • johnny from USA asked:

        can this be filled with the benjamin pump?

        • Tyler from USA:

          Yes

      • joseph from USA asked:

        Will this work on a Drozd Blackbird?

        • Tyler from USA:

          It will not fit into the space that is used to store the 88 gram cartridges on a blackbird. The rear frame of the gun would need to be removed to use this bottle on the gun.

      • W. ANDREW from USA asked:

        Would this work on a Hammerli 850?

        • Chairgunner from USA:

          Yes, but just like the 9oz paintball tanks you will need the adapter which comes with the tank as otherwise it will not reach the attachment in the gun. You will also need to remove the hook where the grip of the stock fits that normally covers the 90g tank but that's easy. Look close and you will see that pushing it to the side from the left side of the gun to the right side of the gun (with the rifle pointed away from you as if you were shooting it). Just keep pushing from left to right until that mount comes off and put it in a safe place. In the summer or when temps are warmer you might prefer the 90g tank or even the 12g adapter as they are lighter because this or a 9oz CO2 tank add significant mass so if you're outside hunting or just cruising around the woods or farm or fields looking for targets the lower capacity options make it more portable.

      • Allan from United Kingdom asked:

        Will this bottle fit in a dig sauer rifle

        • Val from USA:

          Yes, it will

      • Michael from USA asked:

        What is the maximum diameter of the bottle?

        • Tyler from USA:

          2.25" from the gauge to the end of the QD on the other side. The bottle itself is only 2" diameter.

      • melventhemopboy from USA asked:

        CAN IT FILL MY 22 CAL BERJAMIN MAXIMUS AND IF SO HOW MANY FILLS CAN IT

        • Tyler from USA:

          The bottle does not come with a fill assembly, and the regulated output would not allow it to fill your maximus to the full 2000 psi.

      Navigation