Date: 19/12/2018 5:49
0

Customers Q&A on Air Venturi Universal Muzzlebrake, .655"/.590" ID, .855" OD

Pre-order

Out of Stock

Got a question? Got an answer?
Log in, then enter your text.

  • Anthony from USA asked:

    Does anyone know if this will fit the Beeman QB Chief? Or can recommend one that will fit?

    • Paul from USA:

      Measure the outside diameter of your barrel, if it is between .590&.655 it should fit.

  • Raymond from USA asked:

    will this fit on the BSA scorpion 1200 SE ?

    • Stanley from USA:

      No enter your search on the internet , they are available ? It takes a 1/2 x 20 unf threads.

  • Nicholas from USA asked:

    Will this fit the Hatsan 135 QE .25? If not is there another that will? Also, has anyone removed the front sight on that gun without any problems? Thanks in advance! \m/

    • John from USA asked:

      Can I put this on the Benjamin marauder or Benjamin maximus and does make airguns quieter

      • Paul from USA:

        The Benjamin marauder is a fully shrouded barrel rifle, so the muzzle brake won't fit over the shroud.There is no way it can make a rifle quieter, it's basically a handle to cock a break barrel rifle.

    • john from USA asked:

      will this fit a walther terrus 22 cal. If not will any of these advertised?

      • ricardo from USA asked:

        this fit in gamo whisper fusion

        • Paul from USA asked:

          I have a FWB 150 without the front sight. The barrel dia. is .5827 will this work and how far would it slide onto the barrel about two inches?

          • Val from USA:

            Yes, you will need to use included bushings

        • john from USA asked:

          Will brake fit a Beeman r-7?

          • john from USA:

            yes after removing front sight, will also fit hw30

        • Dennis from USA asked:

          When the brake all the way on, how much will it add to the barrel length?

          • Paul from USA:

            It adds 1 1/2'' to the barrel.

        • Kenneth from USA asked:

          Will this product fit an FWB 124

          • Stacey from USA:

            simply measure the barrels outer diameter to see if it falls between the dimensions listed

        • Jacob from USA asked:

          Will this fit the magpul armada

          • Stacey from USA:

            No, The Armada has a shroud over it's barrel that is quite a lot bigger than .655"

        • ivan from Chile asked:

          sumatra 2500 500 cc cal 0.22" (5,5 mm)

          • Dan the Man from USA:

            No.

        • Steve from USA asked:

          Since most German break barrel gun barrel hav an OD of ~.630 -- and NO gun I know of has a bbl with an OD of .655 -- why mightn't we redesign this thing so it actually fits something?

          • Terry from USA:

            Amen to that.

        • xmagh from USA asked:

          Will this work on a Crosman Titan GP .177?

          • Dan the Man from USA:

            No.

        • Jaime from USA asked:

          Will this work in HW95? I wold like to remove the front sight.

          • Tyler from USA:

            Yes

        • Kapuna from USA asked:

          Will this work on a Weihrauch HW50S scoped with no open sights? Thanks...

          • Tyler from USA:

            Yes

        • Brandon from Canada asked:

          Would this fit a Crosman Optimus .177 call thanks

          • Cory from USA:

            Yes, it would work with the shim if you were to remove the front sight (not recommended).

        • Tye from USA asked:

          I need a silencer for a reculse 9mm.what do you think would be the best for that gun?

          • Val from USA:

            this is not a silencer. just a muzzlebrake

        • Don from USA asked:

          Will this fit the Crosman Vantage NP? Thanks!!

          • Cory from USA:

            Yes, it would work with the shim if you were to remove the front sight (not recommended).

        • Samuel from USA asked:

          What is this made of? Steel? Aluminum? Unobtainium?

          • Edith from USA:

            Aluminum.

        • Ernest from USA asked:

          can PA reps answer any questions ?

          • Cory from USA:

            Yes we can. The best contact is 888-262-4867 or sales@pyramydair.com. We do attempt to answer questions in the product sections when possible.

        • javier from USA asked:

          can this be used on a rws 350 magnum?

          • Stacey from USA:

            350 Magnum has .630" muzzle so it would be slightly too big without the shim. You would simply need a thinner material to use for a shim. Shim would need to be .0125" thick to take up the .025" difference in diameter. Or you can use this one Air Venturi Crow Mag Muzzlebrake

        • Richard from USA asked:

          Will this fit the crosman tr-77 once the rubber grip is removed

          • Cory from USA:

            The barrel is a bit to small at .580 so it would not fit well.

        • Bret from USA asked:

          Will this fit a feuercraft 350 classic and a model 48 without altering the barrel.

          • Cory from USA:

            Both have a barrel that is too small for use without shim at .630 and .161 respectively. You would need to make a shim of thinner material for it to work.

        • Bob from USA asked:

          After removing front sights on my Crosman 1077 ( barrel diameter is .625 ) would this item work ?

          • Stacey from USA:

            You would need to shim it for it to stay tight as there is a difference of .030" in diameter, so you would need a shim that is .015" thick around the barrel.

          • Pyramyd from USA:

            This product will not work on the Crosman 1077

        • William from USA asked:

          Will it work on a Feiwekbau 124, or Beeman R1 without modification by a gunsmith?

          • Stacey from USA:

            The Beeman R1 has .630" muzzle so it would be slightly too big without the shim. You would simply need a thinner material to use for a shim. Shim would need to be .0125" thick to take up the .025" difference in diameter. Or you can use this one Air Venturi Crow Mag Muzzlebrake I believe the FWB 124 is the same diameter as the R1. If they have dovetails for the front sight, some filing may be necessary.

          • Pyramyd from USA:

            Yes this product will work with both

        • Steve from USA asked:

          Will this work on a Crosman Storm XT? If not, what will.

          • Cory from USA:

            It will not work on a Storm XT without modification or removal of the front sight. You would then need to shim the barrel so this is not optimal.

        Navigation