Out of Stock
I used a Beeman on another RWS 48 with UTG 3.9, and it tends to sit a tad bit high. Does anyone have experience with this one and it's lower height on a RWS 48 with a UTG 3x9?
We suggest a droop compensation mount with the RWS guns. UTG Drooper Scope Rail, 11mm-to-Weaver.... Low weaver rings will work on the drooper mount.
Is the 120 MOA adjustment range in one direction from zero or is the adjustment 60 MOA up and 60 MOA down?
120 includes the up and down range of movement.
Does BKL has a picatinny adaptor for this? If yes, which is it?
If you mean a version of this mount that can attach to a picatinny rail, then no, they do not.
Will this mount work on a Hatsan model 125 ?
Will this fit an on 11 mm dovetail?
Yes but you have to use the 3 screw widening mechanism. Follow the instructions and crank as hard as you can. I used a large adjustable wrench gripping the Allen wrench for maximum leverage to widen it
Will this fit a Benjamin np2 .177?
Is this product available in medium or high profile as I want to use my 4/12 x40 scope
It is only available in this height but •Bottom of Mount to Bottom of Scope Tube: 0.825" so a 40mm objective should fit fine.
And how much elevation and windage is there
120 minutes of angle adjustment (2 degrees of angle)
how is the windage adjusted? do you have a video?
Unfortunately there is no video
I do not see how the elevation works. Do you have a youtube vedio