Date: 23/3/2019 23:49

Customers Q&A on Crosman Silicone Chamber Oil

Add to Cart


Got a question? Got an answer?
Log in, then enter your text.

  • michael from USA asked:

    Can this be used on the blowback seals on the Crossman DPMS

    • Tyler from USA:


  • Peter from USA asked:

    Can this be used my Benjamin rogue .357

    • Tyler from USA:


  • Shane from USA asked:

    Can this be used in both my Benjamin break barrels?

    • Tyler from USA:


  • James from USA asked:

    I use Otis 085 for barrel or ballistal this good to use on the breach seal where the pellets go?

    • Deter from USA:

      From what i understand, this silicone oil is a "catch all" lube/sealant. It should work for breach seals. Have you used otis oil with no issues yet?

  • Ronald from USA asked:

    can I use this oil on my Browning 800 pistol spring action

    • Tyler from USA:

      It depends on what you are trying to lubricate

  • Jason from USA asked:

    Can I use this to lubricate my PCP hand pump parts?

    • Tyler from USA:


  • Richard from USA asked:

    Is this considered an non-dieseling oil?

    • Daniel from USA asked:

      Can this be used on Nitro Piston 2's If so How many shot's should be run threw it before using?

      • Tyler from USA:

        Yes. I would recommend a drop or two every 500-1000 rounds, or if you hear a honking sound while cocking the gun

    • stian from Norway asked:

      Hi.. Is this safe to use on evanix sniper 50 cal? If not can you guide mee please.

      • Tyler from USA:


    • Jeremy from Canada asked:

      Can U use a drop on the co2 when using a rifeled pellet pistol?

      • Frank from USA:

        Use crosmen Pell gun oil 1drop c02. Don't use silacon

    • Frank from USA asked:

      How would I apply to my IZH61

      • topogiyo from USA:

        I got the same question,but no help from PyramydAir?

    • Mouhanad from USA asked:

      Is it true that this should only be used for older guns with leather seals?

      • Frank from USA:

        Not the right oil fo. r madeleather seals

      • James-M. from USA:


    • vicky from India asked:

      i have RWS 48 in .177, how can i use this chamber oil , should i open the breech and just drop few drops in chamber

      • Erika from U.S. Virgin Islands:

        RWS guns need one drop every 2000 to 3000 shots

    • Fabio León from USA asked:

      Greetings. This oil can be used for PCP rifles and oring's?

      • Erika from U.S. Virgin Islands:

        Apply this on the barrel o-ring every 3 months or 500 shots

    • Phillip from USA asked:

      Can this lube be used for the barrel, seal, and reaxis gas piston in a Umarex Octane .22?

      • Dan the Man from USA:

        Just the seal and piston.

    • joseph from USA asked:

      is this lube safe for Nitro guns?

      • Tyler from USA:

        Yes it is.