Date: 12/8/2020 20:41

Customers Q&A on Hawke Optics 6-24x44 AO Varmint Rifle Scope, 1/2 Mil-Dot Reticle, 1/4 MOA, 1" Tube

Add to Cart


Got a question? Got an answer?
Log in, then enter your text.

  • Steven from USA asked:

    Is this a SF or FFP scope

    • Mark from USA:

      This is a SFP scope.

  • Robert from USA asked:

    Will this scope be suitable with a Benjamin foritude airgun? What hight rings do i need for this?

    • John from USA asked:

      Will this work on a HW 97 Springer air rifle?

      • Tyler from USA:

        If it is stock, Hawke does not recommend it. This scope is not recommended for rifles producing more than 12 FPE. If you tune the gun to 12 FPE or less, it should be okay

    • Maureen from USA asked:

      Will this work on the Umarex Gauntlet? Or is it to long?

      • Patricia from USA:

        i use the 6-24x44sf on my .25 gauntlet , wonderful combo for my eyes and purposes . i had to use high rings for the objective bell to clear the barrel band du to the length of the 6-24 .

      • Tyler from USA:

        It would be fine with the proper rings. I would recommend these: Leapers Accushot 1" Rings, High,...

    • Travis from USA asked:

      Does this have a thin reticle suitable for target shooting shooting or is it a thicker one for hunting?

      • Stanley from USA:

        If you click on the image it shows the reticle ?

    • Nick from USA asked:

      Where can I get a sun shade that fits this scope

      • Stanley from USA:

        Try there website at .

    • Aaron from USA asked:

      Is there a side wheel available for this scope?

      • Patricia from USA:

        the crosman/centerpoint CPSWC 80mm side wheel works perfectly on mt vantage 6-24x44SF . the range numbers on the wheel are backwards with how the vantage works so they are useless . but the wheel works perfect for turning the sf turret . the rubber gasket on the wheel needs to be removed for a nice snug fit , then gently snug up the grub screws .

      • Stanley from USA:


    • MICHAEL from USA asked:

      I want to use the RWS droop mount 30mm and use 30mm inserts for 1 inch hawke scope 14162. Will this scope handle a LGU MASTER , its a springer?

      • Tyler from USA:

        It is not recommended for springers over 12 FPE

    • Jamie from USA asked:

      Did I read the bold comment right warning not to use these on springers ?

      • Paul from USA:

        Hawke doesn't recommend 1 inch scopes for springers use 30mm instead.

    • Anto from India asked:

      may i know which country manufacture this scope? is there the illuminated reticle? and is it possible to use the lens cover + sunhide and side wheel?

      • Tyler from USA:

        China. And no, there is no IR

    • Naphon from Thailand asked:

      Is it new model? It's old picture and old description. Is the reticle etched on new model?

      • Tyler from USA:

        This scope does not have an etched glass reticle

    • shaun from USA asked:

      Is the reticle etched or wire?

      • jay from USA:

        i believe it is teched...the tell-tale sign is when you turn the illumination on you see only the inner mil dot portion lit up.. the outer thicker lines of the reticle stay black...only an etched glass reticle can do that

      • Stanley from USA:

        Doesn't mention either way? Im sure it would say in the description if it was?

    • Eric from USA asked:

      Does it work on gas piston air rifles?

      • Dan the Man from USA:


    • John from USA asked:

      Does it come with the sunshade?

      • Jerry from USA:

        It does not come with a sunshade