In-stock
Got a question? Got an answer?
Log in, then enter your text.
How will this work with the Air Arms TDR?
It would work very well, just make sure you get high rings
Esta mira telescopica es de primer plano focal?
This scope is second focal plane
What height rings to clear barrel on synrod?
High
Does the Bullseye ZR 1 reduces enough the recoil so that I could use it with Hawke 4-12x50 scope, or do you still recommend the 4-12x40 instead? Thanks for your advice.
I wouldn't risk it personally, but it is possible that the Bullseye mount could make this scope work on the 54. Cannot say with certainty though
Thank you for your answer. Can you recommend a proper scope for Diana 54?
Either of these would work: Hawke Sport Optics Airmax 3-9x40... or Hawke Sport Optics Airmax 4-12x40.... I would also recommend the Bullseye mount from Diana, it will help dampen the recoil to the scope: Bullseye ZR 1-Pc Mount, Fits...
Can I use it on a Diana 54? --- I see that this scope is not recommended for a 12ft/lb spring rifle! Nowhere is it mentioned the ft/lb force of Diana 54. How can we found it (force of ft/lb)? (I know that it is on the list of recommended accessories, but what about ft/lb--- Is it correct?)
I wouldn't recommend it, that is a 20+ FPE gun
Will this scope take a side wheel, or can you use a side wheel with it? if so which one?
No, it has an adjustable objective, not a side parallax adjustment. So there is no side wheel for it
New to air rifles. I see this is not rated for spring guns greater than 12 FPE.... Curious how it can be harder to make a scope that will last on a spring gun, when I didn't have trouble buying a scope for my .300 Winchester Magnum years ago. Can someone explain?
Your .300 win mag recoils in one direction, a spring piston airgun recoils both forward and backward, and in some cases there is a fair amount of torque exerted on the scope as well. This bi-directional recoil is why you need a spring gun rated scope, and also why Hawke differentiates between scopes rated for sub 12 FPE springers and guns that produce more power than that.
Can this scopes be used on an AR powder burner?
Yes
Would this be a good scope for Airforce Texan .45 Cal. Gun.
Definitely, but make sure you get high rings for it
Can you use this scope on a gamo maxim swarm? And can you mount a swat wheel on it?
No over an inch to long , unless you use a different mount to raise it ? It is not a side focus scope .
Can you add a swat wheel to this scope?
No .
can you use the hawke 4x12x50 scope on a 308 deer rifle???
Yes
How many mills does this scope have
4 mill dots in each direction .
Why doesn't this scope say shockproof? And is this scope good for black ops sniper .22
Hawke doesn't recommend this scope for use on spring or gas piston rifles that produce over 12 FPE
where is this scope made?
China.
what rings would you suggest for a .22 Armada.
probably the high rings since this is a 50mm objective
What does the reticle look like? How many mil-dots going down? Rich B.
There is a picture of it above. There are 4 mil dots going down from the center of the reticle
Is this scope suited for an Evanix Rainstorm ll in 25 cal.
Yes it would be a good scope for the PCP.
What would be the ideal ring height to use for a Benjamin Trail XP?
I would use high mounts so the scope could clear the barrel.
Does the illumination turn off, or must you remove the battery?
Yes from the dial for red/green adjustment
Supports gas piston air rifles
yes, it's rated for spring and gas spring air rifles
Can I use this scope in my Benjamin NP XL .22???
Yes, you just need some weaver rings.
I do not see rings included. Iwould like to mount this to a 11 mm dovetail. Are rings included for this mount and if not what do you recamend
This scope does not come with rings. I would suggest BKL 1" Rings, 3/8" or 11mm Dovetail, Double Strap, High, Matte Black, BKL 1" Rings, 3/8" or... for most 11mm applications.
Will this scope stand the violent recoil of the diana magnum 350? ?
Yes, this scope is able to take the recoil of the Diana Magnum 350.