Date: 25/6/2019 0:39
0

Customers Q&A on Leapers Accushot 1-Pc Mount w/1" Rings, High, 11mm Dovetail

Add to Cart

In-stock

Got a question? Got an answer?
Log in, then enter your text.

  • Eric from USA asked:

    Will this mount work on an Avanti Valiant/T200 style PCP with a 50mm scope? I currently have a 2 piece high mount in the cart but don't think it's going to fit right? Thanks

  • Shawn from USA asked:

    Does anyone know if this will fit on a Gamo Swarm Maxxim? Also, can I mount my new UTG 3-9x32 AO Compact CQB Bug Buster Rifle Scope, Illuminated Mil-Dot Reticle, 1/4 MOA, 1" Tube, Medium Max Strength scope on it?

    • Mark from USA:

      The mount will fit on the Gamo Swarm Maxim. The Bug Buster scope is too short to fit the Mount.

  • Francis from USA asked:

    What are the inch lbs spec for the rings?

    • Tyler from USA:

      Most of the Leapers rings have a recommended torque of 25 in. lbs

  • MauiWally from USA asked:

    Thanks you in advance for the assistance. The specs say it is 80mm between inside the rings and a 100mm base. The 80mm inside measurement seems off, this would mean the rings are 10mm wide? Or is the 80mm inside measurement from center to center of the rings?

    • Nicholas from USA asked:

      Will This Fit My Gamo Whisper Fusion Pro (11mm Scope Rail) And Does It Has The Recoil Pin?

      • Tyler from USA:

        Yes and yes

    • Rob from USA asked:

      Good for an RWS M24?

      • Tyler from USA:

        Should fit without an issue

    • Jeff from USA asked:

      Will this Mount work with a Hatsan torpedo 100x and a Hatsan Optima 3x9 X 40OD scope?

      • Tyler from USA:

        Yes

    • Nicholas from USA asked:

      Will this fit my Gamo whisper fusion pro??

      • Tyler from USA:

        Yes

    • Jon from USA asked:

      will these rings work on my RWS 48/52 Side Cock .177

      • Tyler from USA:

        yes

    • Hassan from USA asked:

      Will this fit a RWS 34?

      • Tyler from USA:

        Yes

    • David from USA asked:

      will this fit a RWS Panther 34 . Bought a new scope with medium rings and still can't get enough elevation. Looked at these drooper mounts but they tilt the scope in the wrong direction. I need to raise the scope not tilt it down.

      • Tyler from USA:

        Yes, this will fit

    • Richard from USA asked:

      03/27/16 - Will this fit a Crosman Titan GP?

      • Tyler from USA:

        Yes

    • Leonard from USA asked:

      Will this work well with the BSA contender 3-12×40 and a Benjamin Discovery?

      • Tyler from USA:

        It should work well, but you might want to go with two piece rings instead. They will give you a little more freedom in your mounting position.

    • mark from USA asked:

      How high is this mount?

      • Stanley from USA:

        From the bottom of the scope tube to the receiver it is 1 inch.

    • Chris from USA asked:

      Will this mount work with a gammo 3/9 x 40 ao scope on a gammo big cat 1400

      • Stanley from USA:

        Yes.

    • Jose from USA asked:

      Will this mount work with the Hawke Sport Optic Vantage 4-12x 50 in my Hatsan 125 snipper .22????

      • Stanley from USA:

        I used a similar mount and it didn't work on my 125 sniper 25 caliber. The recoil bent the stop bar. I would try the weaver mount option with two piece heavy duty mounts and loc-tite all the screws.If your using a 50mm scope you will need high scope mounts.

    • AirsoftMA from USA asked:

      Can this mount withstand the recoil of a .22 cal 1000fps magnum?

      • Stanley from USA:

        If your rifle has the weaver mount option it would be much better , since this mount has a stop pin then it may work , providing the rifle has the holes in the receiver.

      • Val from USA:

        yes, absolutely...

    • Alphin from India asked:

      will this mount fit gamo bone collector .22 air rifle?

      • Val from USA:

        yes, it would

    • Jerry from USA asked:

      will this mount fit the Umarex RWS 850 AirMagnum .177 cal?

      • Val from USA:

        yes

    • Jerry from USA asked:

      Will this scope fit my RWS Umarex 850 Air Magnum .177 cal

      • Val from USA:

        yes

    • Steve from USA asked:

      I replaced mounts on my RWS 48 with this unti and now cant get my zero on scope to come up enough. Whta is wrong?

      • KinLok from USA:

        Try DN460

    • Steve from USA asked:

      I recently switched to this mount on my RWS 48 and now cant get elevation on scope high enough. What do I need to do?

    • VictorF. from USA asked:

      Fit the RWS 48 with new T06 trigger?

      • Dan the Man from USA:

        Yes.

    • James from USA asked:

      Sorry. Meant UTG Drooper Mount. Use with, or replace the UTG Drooper Mount?

      • Dan the Man from USA:

        No, this mount has no droop and can not be used with a UTG drooper mount.

    • James from USA asked:

      Does this unit replace the Leaper Drooper Mount or used in conjunction with the drooper mount? (Sorry. New to all of this...)

      • Dan the Man from USA:

        No, this mount has no droop and can not be used with a UTG drooper mount.

    • bruce from USA asked:

      fit rws 48

      • Dan the Man from USA:

        Yes.

    • micheal from USA asked:

      the same kind of tape that they use on other scope mount and ring.

      • Cory from USA:

        Yes, indeed!

    • robert from USA asked:

      what kind of tape is used inside the rings thanks

      • Cory from USA:

        It is a cushioned tape specific to scope rings.

    • Robert from USA asked:

      Does a Gamo Shadow 1000 have an 11mm Dovetail or a 3/8" dovetail?

      • Richelle from USA:

        11mm and 3/8" will both work on the rail.

    • micheal from USA asked:

      what is the length of the mount?

      • Richelle from USA:

        4 inches

    • PAUL from USA asked:

      Will this work on a Walther LGV Challenger?

      • Jerry from USA:

        yes

    • Kyle from USA asked:

      Will it work on the Hatsan mod 95 vortex

      • Jerry from USA:

        Yes, it will work on the 95

    • Hong from Malaysia asked:

      Can mount on Gamo .177 hunter and .22 whisper air rifle ?

      • Stanley from USA:

        Yes you can.

    • Fabian from USA asked:

      Does this mount fit the rws 350 magnum?

      • Val from USA:

        Yes, it does

    Navigation