Date: 19/10/2018 16:55
0

Customers Q&A on Leapers UTG 3-9x40 AO True Hunter Rifle Scope, EZ-TAP, Illuminated Mil-Dot Reticle, 1/4 MOA, 1" Tube, See-Thru Weaver Rings

Add to Cart

In-stock

Got a question? Got an answer?
Log in, then enter your text.

  • Brandon from USA asked:

    Does this fit on the Seneca Wingshot 2 if I have the scope rail recommended for that gun already?

  • Edward from USA asked:

    Will this scope fit on a Gamo Swarm out of the box

    • Tyler from USA:

      No, you would need dovetail mounts, it comes with picatinny mounts

  • Nicholas from USA asked:

    Will the utg 4-16x44 mount on my Whisper Fusion Mach1 with the currant rail system? Could I just drop it in the Gamo Sight mounts?

    • Tyler from USA:

      You will need dovetail rings to be able to mount it onto your Gamo.

  • James from USA asked:

    On a Gamo should you use the RRR or take it off?

    • Tyler from USA:

      I'd say they make it that way for a reason, so you might as well use it.

  • LT from USA asked:

    Anyone mount this on a Stoeger x20S2 (S2 suppressor)? What rings and or adapter did you use? Thanks for any ideas.

  • Geo560 from USA asked:

    Will this scope fit Hatsan 135 QE vortex

  • Jose from USA asked:

    This scope fit to Umarex Gauntlet .22cal.

  • Richard from USA asked:

    Would this scope fit upon my Ruger Air Magnum Air Rifle? with the current Pitcany Weaver mounts? if so would this be a good practical choice for pairing

    • Stanley from USA:

      Yes good choice.

  • Maureen from USA asked:

    Will the scope fit the Gamo Whisper Fusion Mach 1?

  • Matthew from USA asked:

    Will the included mounts work with my Crosman 1077W Repeatair? or will i need another set of mounts?

    • Matthew from USA:

      OK to answer my own question for others benefit... NO the included mounts won't work as the Crosman is 11mm, i don't actually know what size the included rings are. They're nice though, so i ordered an 11mm 1" set of Leapers so that should fix that. Cheers.

  • Randel from USA asked:

    Does this scope have etched glass. Need one for a Hatsan 125 Sniper Vortex Air Rifle that will hold up. Any ideas on rings and mount.

    • Stanley from USA:

      Not at this price point.These rings will work on the sniper. UTG / Leapers are some of the more reliable ones.

  • Theodore from USA asked:

    Will this scope fit the Gamo Swarm Maxxim, and if so what mount will I need?

    • Stanley from USA:

      Yes. The included mount can be reused .

  • Oscar from USA asked:

    Will this scope fit the Crosman Optimus air rifle without having to take the fixed sights off?

    • Calusa from USA asked:

      Would this scope work with a Benjamin Trail NP2?

      • Stanley from USA:

        Yes.

    • James from USA asked:

      will this scope work on a walther terrus or a gamo silent cat if so what mount should I use

    • Russell Adam from USA asked:

      Would this scope work with any of the following mounts on a dovetail rail? 1.) BKL 1-Pc Mount, 4" Long, 1" Rings, 3/8" or 11mm Dovetail. 2.) BKL 1-Pc Mount, 4" Long, 1" Rings, 3/8" or 11mm Dovetail, 6 Base Screws, .007 Drop Compensation or hopefully 3.)BKL 1-Pc Adjustable Scope Mount, 30mm Rings, 3/8" or 11mm Dovetail on my Magtech n2 extreme 1300 which I haven't been able to stop scope creep thus far.

      • Russell Adam from USA asked:

        What is the difference between the UTG 3-9x40 AO Hunter and the True Hunter.

        • Tyler from USA:

          Do you have the part number for the "Hunter" version you're referencing?

      • David from USA asked:

        I have an RWS 34 combo rifle and scope with the 11mm flat top rail. I understand that the RWS Lock Down 1" Mount that came with the gun will not work with this UTG scope. Can I use the High Profile QD twist lock rings that come with the UTG scope or will I need the Leapers Accushot 1-pc Mount w/ 1" Rings?

        • Tyler from USA:

          The rings that come with the scope will not work on the RWS. The 1 piece Leapers mount would be a great choice.

      • Raymond from USA asked:

        I'm a big Nikon fan - cameras/lenses. Do the coatings and optics on this Leapers UTG True Hunter 3 9x40 AO scope rival the Nikon scopes that are close to this price range? I'm esp interested in twilight small critter hunting up to 25 yds with my Hammerli 850 Magnum .22 repeater CO2 rifle. I presume I would need some Medium height 1" dovetail rings with this scope and not the weaver style. Thanks for any insight here.

        • Tyler from USA:

          I've found the Leapers scopes to be very comparable to many of the Nikon's that I have used. Up to the $150-200 price point. This scope would certainly work well for your use and yes, you would need dovetail rings to put this onto your Hammerli 850.

      • erik from USA asked:

        what is minimum focus distance?

        • Val from USA:

          5 yards

      • Austin from USA asked:

        Will this scope stand up to the harsh recoil of a Diana 48?

      • Shannon from USA asked:

        I have two Benjamin Marauders.... The description does not give specs on the provided mounts. Will the weaver mounts shipped with these scopes fit the weaver double mount requirements/dimensions of the marauders and 2 will there be clearance for function or should I go to a higher mount like accushot Med or High? S/F, Shannon

        • Val from USA:

          These are weaver rings, you need regular airgun rungs (3/8" dovetail) for Marauder. Marauders are OK with medium height rings as long as your scope objective is under 50.

      • Richard from USA asked:

        Will this sight hold up to the Gamo Mach1 Pig Man .22 Cal. EGT air rifle?

        • Jaime from USA:

          yes

      • jon from USA asked:

        am I gonna be able to see my iron sights through the scope rings on my 34?

        • Jaime from USA:

          no

      • jeremy from USA asked:

        I have this scope on my Diana RWS 34 and love it. I've heard of a lot of people using this on their AR15s. In the description it states that it will handle whatever your real firearms can dish out. My question is, how well will it hold up on a high power firearm, such as, 300 Weatherby or 7mm magnum?

        • Chevota from USA:

          A 300 Weatherby will not be as hard on the scope as a common break barrel air rifle. It isn't about the power, it's about G's. I can't imagine a firearm that could hurt this scope, or even the cheapie scopes bundled with some airguns for an extra $10.

        • Jaime from USA:

          True Strenght Leapers scope can handle magnum rifles

      • Christopher from USA asked:

        Will tis mount as shipped with the Sumatra 2500?

        • Tyler from USA:

          The mounts that come with this scope will not fit the Sumatra. You will need a set of dovetail rings.

      • Enrique from USA asked:

        Will this work for a Magnum Springer Air Rifle?

        • Stanley from USA:

          Yes

      • Brian from USA asked:

        I have a Beeman Quiet tek .22. I want to replace the existing scope. Can I use the existing rings to mount this scope or do I need something different? Thanks

        • Stanley from USA:

          Yes as long as your existing rings are one inch it should work.

      • Red from USA asked:

        Is this good for the Daisy Powerline 880 or is this overkill for that rifle

        • Stanley from USA:

          I have a 3x9x40mm on my 880 and i like it overkill or not. Go for it.

      • Red from USA asked:

        Is this a good scope for the Daisy Powerline 880 or is it too overkill for that gun

        • Tyler from USA:

          It's likely a bit heavy for the gun, but there's nothing wrong with mounting it on the 880 if that's what you want.

      • bela from USA asked:

        Is this scope strong enough for Umarex Ocane?

        • Val from USA:

          yes. It's Leaper's True Strength marked

      • Chad from USA asked:

        Will this scope work on the Hatsan AT44PA Long Air Rifle, 0.25" (6.35mm), Synthetic, Black /AMBIDEXTROUS with the rings provided? If not what do I need?

        • Val from USA:

          yes, weaver rings will work fine.

      • Jody from USA asked:

        Will this scope work on a samyang 909 ok

        • Val from USA:

          yes, just need the dovetail rings, not the weaver ones.

      • Avery from USA asked:

        I was going to get a gamo big cat 25cal. I was wondering would these mounts work for it.If not what mounts will I need.

      • Michael from USA asked:

        Etched glass or wire retical

        • Jesse from USA:

          Wire

      • Rogelio from USA asked:

        I have an Umarex Fuel .177 cal with Weaver/Picatinny rail. What will I need to mount this scope on it?

        • Tyler from USA:

          The scope comes with rings that will fit on your Fuel.

      • Jack from USA asked:

        What do I need to mount this scope on Hatsan 95. Is this the right scope for 0.22 cal. Will I need Drooper Scope Rail too ?

        • Tyler from USA:

          Cannot say if you will need a drooper rail or not, that can vary from gun to gun. That said, this one piece mount would be a good choice Leapers Accushot 1-Pc Mount w/1"...

      • Fernando from USA asked:

        What will i need to mount this scope on a Benjamin Discovery rifle? Includes the sunshade tube?

      • Biff from USA asked:

        I have a Benjamin Titan NP with 11mm dovetail. What will I need to mount this scope on it?

      • Hector from USA asked:

        Will this work on a np xl 1500 if so will it work with the mounts that came with the rifle or will I need use different ones?

        • Dan the Man from USA:

          It will work with the rings that come with the scope.

      • Rishat from Kazakhstan asked:

        My scope, that goes together with gamo bull whisper igt, slides back. Will this scope fit my rifle together with Hawke 1" Rings, Weaver, Low,... and UTG Drooper Scope Rail, 11mm-to-Weaver...? Is that combo is ok to solve my problem? And is there any other combinations better than this for everyday use? Thank you

      • Matt from USA asked:

        Will this fit the knew RWS 340 withe the mounts that come with it

      • VictorF. from USA asked:

        Will this work with provided mounts on a Diana RWS 48 T06 trigger? Will it hold up to this springer?

        • Cory from USA:

          As long as the mount is 1" medium or high yes it will, and yes it is compatible with a spring powered air rifle.

      • wade from USA asked:

        On the reviews a few people recomended getting "high rings" is this strictly for the weaver rail or is the advice for 11 mm dove tails too? What rings do you recomend for 11mm dove tailand should I go med. or high.

        • Dan the Man from USA:

          High, due to the diameter of the front objective's raised grip surface.

      • dennis from USA asked:

        what kind of warrantee does this scope have

        • Dan the Man from USA:

          Lifetime limited warranty

      • Daniel from USA asked:

        Would I need to use a different type of mount for this scope? I own the Winchester M 14 Rifle. I have the AIM mount

        • Dan the Man from USA:

          If you managed to get a weaver rail on your M 14, then this scope would work.

      • samuel from Canada asked:

        Is this scope good on a Crosman Nitro Venom in .22 cal?

        • Erika from U.S. Virgin Islands:

          Yes, it will work for you

      • Ralph from USA asked:

        Is this good for the Condor?

        • Jerry from USA:

          It would work on the Condor however you would need a set of dovetail rings rather than the Weaver that come with the scope

        • Dan the Man from USA:

          Yes, you just need to get some high dovetail rings for it.

      • Roger from USA asked:

        is this a good scope for the hatsan 135 magnum, just got the rifle last week and have only shot it 50 times so far

        • Dan the Man from USA:

          Good match for the 135.

      • Craig from USA asked:

        Will this mount on my Umarex Surge or will I need an adapter?

        • Dan the Man from USA:

          You would have to use a 1 piece mount (PY-A-805).

      • David from USA asked:

        This is kind of hard to explain...but how close are the mil dots in this scope? Are they so closing that they are touching or is it like a typical mil dot scope? (I know it gives a picture but ive had pics like that be deceiving in past)

        • Jesse from USA:

          Depends on your magnification

        • matthew from USA:

          They are about 2 times as wide as in the picture of the crow.

      Navigation