Out of Stock
Will this work on my .177 Gamo Hunter Extreme SE
With the proper mounts, yes
I have a Remmington NPSS .22 cal and want to replace the factory 3-9 centerpoint scope. Will this scope work with my gun and would I be able to use the one-piece mount that came with my gun?
Yes it will work. Depends on the height of the rings that came with your scope. If they are medium, I would recommend opting for a high one piece mount like this: Leapers Accushot 1-Pc Mount w/1"...
Has anyone put this on a Hatsan 135 QE Vortex Carnivore in.30? Do you have to shim the scope for barrel droop, or is that not an issue with the 135?
Will this Savage 93R17 BTVS.
I really need to replace the scope that came from Gamo on a Gamo Swarm Maxxim .22 10 shot break barrel gas piston pellet rifle. Will this scope mount right up to the existing mount rings? And will the magazine be visible when sighting with this scope?
No, this is too long to work for what you are trying to do. I would recommend this one instead: Athlon Optics 3-12x40 Talos, Mil-Dot...
will this fit on a Hatsan MOD 135 Vortex QE Carnivore .30 Cal?
Is this a suitable scope for the Beeman RX2?
Yes good choice.
how come the 4-16x50mm easy tap utg true hunter is the same price as the 6-24x50mm.a.o. true hunter scope? I know the 4-16x50 mm a.o comes with a sunshade that is really really nice and the 6-24x50mm a.o. true hunter doesn't it's kind of tricky when you are ordering a scope . I really don't need the extra magnification as I use mine for target shooting and am used to a max of 16 power magnification . and this scope actually has a 5 yd to infinity parralax and tha is great really easy to sight in at close range without retical blur or target p.o.a.blur
I have both scopes and both came with the sun shade as far as price goes they're kind of close to each other in magnification
I just purchased a Walther Parrus and was wondering which mount would be best with this scope to use on it? Thanks
Try Leapers Accushot 1-Pc Mount w/1"... Leapers accushot one piece mount
is this a full mil-dot reticle and will these rings fit on a Benjamin discovery
It is a mil-dot reticle . And no the rings that are included will not fit the disco it has a 11mm dovetail , you would need to change them out for rings that fit a 11mm dovetail or purchase an adaptor to make the weaver rings work . A Utg 11mm to weaver mount PY-A- 2401.
Can you tell me outside diameter of the objective lens end?
I've found the info I was looking for on Leapers site. 60mm OD.
IS THIS SCOPE RATED TO WORK ON A HIGH POWERED RIFLE ( 7MM REM MAG ) ?? THANK YOU
It should hold up fine.
Is this one suitable for my RWS model 52 springer?
Stick with the Leapers James, they will hold up to just about anything you mount it on for this price you wont beat it!
Leapers scopes are rated for springers.
is this escope suitable for a Benjamin marauder .25 or is ther any better for this rifle or what do tou suggest? thanks
I like mine so far and it handles recoil on my RWS34. With the non recoil characteristics of the marauder you should be fine.
I want to mount the scope on my Bone colleter IGT 22. But I need mounts to adjust for barrel drop. Please give a recommendation, Thanks in advance. Fellow air gunners.
Is this scope a good one for my Hatsan Sniper 125 .22 vortex??.?
Yes, this is a good option for that rifle
Will this scope stand the violent recoil of the diana magnum 350.
Yes, you will be able to use it on your 350
Is this scope suitable for a spring break barrel rifle?
Yes, I have the model 4-16x50AO that this one replaced and it is still dead on after 2 years on a RWS34. I just bought this one for my other 34. I tried 2 of their Accushot series side adjust scopes but both had issues and were returned prior to the PA 30 day wty. Leapers/UTG has a lifetime wty. to the original owner so that is also some piece of mind. Hope this helps, RP.
I always go with UTG in my springers. I've always gotten my money's worth. They last. If it happens to break, it's not like you are replacing a 300$ scope.