Date: 19/3/2019 2:48

Customers Q&A on Nardi USA Atlantic P Air Compressor, Electric, 4500 PSI/300 Bar

Special OrderLimited Quantities.
Check product details for delivery time.

Got a question? Got an answer?
Log in, then enter your text.

  • lino from United Arab Emirates asked:

    we have NARDI ATLANTIC 100 the problem in 47 second automatic switch off the compressor, what we should do and what is the problem?

    • Joseph from USA asked:

      Does this unit remove moisture?

      • Tyler from USA:

        Yes. It does have an integral moisture filtration system

    • Christopher from USA asked:

      Is there a way to set maximum pressure output or notification when set pressure is achieved? I use 3000 psi tanks.

      • Paul from USA asked:

        Whats the cfm it puts out?

        • PickUp from USA asked:

          Is the nardi a 3 stage or 4 stage how many amps does it draw

          • David from USA asked:

            What is the rebuild time

            • Fernando from USA asked:

              I have a big air tank 6 liters (350cu inches?) how much would it take to this compressor fill it?

              • DeadEye from USA asked:

                What adapter do I need to connect to a standard male foster fitting?

                • Cory from USA:

                  It is female European DIN with male 1/8 bspp, you would screw your foster fitting onto the male threads.

              • darren from USA asked:

                Is this also clean breathable air for diving?

                • Val from USA:

                  Not breathable, unless you get a filter from Nardi and install it

              • Stephen from USA asked:

                What specific type of oil should I use? Is the Amazon DeWalt D55001 full synthetic a good choice?

                • Jerry from USA:

                  I would refer to the manufacturers recommendations

              • mike from USA asked:

                Is it 220 or 110 ,plug in

                • Sparky from USA:

                  It requires a 240 v ac single phase 30 amp circuit. at 240v ac it draws 16.5 amps FLA times 1.25 for continuous duty which equals 20.625 amps so next available breaker size will be 30 amps. there is a 80% deduct on the breaker load ampacity witch is 24 amps. the feeder wire size will need to be #10 awg with a #12 awg ground.