Have a krahl n07 destroyed several scopes will this one hold up
Does this scope have the glass recticle
Hi does it fit the hatsan 135 .30 cal?
Yes since the rail accommodates both weaver mounts (which this comes with) and dovetail rings
looking to add this to scope to a Gamo Whisper Mach, which I believe has an 11mm rail. The rings that come with this wont be sufficient, right? I believe I should get the 11mm for 30mm tube, is that correct?
Leapers Accushot 1-Pc Mount w/30mm... would be a good choice
Will the scope mounts work or fit properly on an RWS 350 Magnum rifle?
On the factory dovetail, no. But if you get a droop compensator (as these are known to have some droop), then the included rings will work. Check out this one: UTG Drooper Scope Rail, 11mm-to-Weaver...
Can this handle the recoil of Break Barrel airgun specifically Webely VMX D-Ram? What is the weight and dimension including the box? For shipping purposes.
Yes, it carries a lifetime warranty if it does have a problem though.
Will this scope ship to Hawaii?
Hi folks, Whats a good mount to put this scope on a .22 Benjamin 392?
Hi guys so I am just wondering, I know on some UTG scopes they have an emerald coating on the lenses to let more light in and I was wondering if this scope has it as well or if it is only certain UTG scopes?
Pretty much all of the UTG scopes have the emerald coating, this one included.
Will this scope and rings fit on my Crosman Nitro Venom with out problems? What single mount would fit this scope and my Crosman Nitro Venom? Thanks in advance.
Yes it will fit with the included rings
Is there a short version of this scope?
Does anyone know where can I purchase replacement flip up lens covers for this scope?
You could contact leapers.com or call at 734-542-1500 .
What side rings would this scope need to fit on my BSA r10 mk2?
30mm rings that fit the 11mm dovetail.
Just got the new Benjamin trail stealth SBD in .22.. will this scope and rings work for it?
Will this scope work on a Gamo Swarm Maxxim? The length appears to be ok. Would new rings/mount be needed or would the original Gamo set-up work on this?
You would need high, 30mm rings...I'd go with a one piece mount like Leapers Accushot 1-Pc Mount w/30mm...
Would this be a good scope for my .22 cal Gamo Bull Whisper Extreme springer? If so, what mounts would you recommend?
Yes i used the same scope on my Gamo accu with the leapers one piece mount PY--A-827 . I think the one piece mounts work best on springers and gas ram rifles because of the recoil.
will this fit on Ruger Blackhawk Elite Air Rifle
Yes it will try the one piece mount mentioned above Leapers Accushot 1-Pc Mount w/30mm....
Is this scope good for the RWS350 Magnum 25 cal I have?
I bought this scope originally for my Colt M4 .22lr and had it on for a few years, taking normal field abuse, worked freaking great!. After going back to irons on that rifle, I put the UTG on my Walther Talon Magnum .177 Nitro Piston. My questions are 1)why after it being mounted on my Walther air rifle for only 2 shots, did the lens in the scope spin if it is rated for air rifle recoil? 2) I freaking love this scope, why should I purchase another one just like it if I'm just going to throw $120 down the drain in 2 shots? This incident has made me leary on any scope on the market rated for air rifle recoil. I do not want to spent lots of money for an air rifle scope. Please convince me
It has a lifetime warranty.
will this work good on a walther terrus 22 or gamo silent cat 177 because I have a nikko 6x40 scope right now on walther terrus I do like it but I want to upgrade
I have this on my Terrus 22 with medium mounts.
Yes i just ordered this scope for my Gamo Accu, it should work just as good on those.
Will this work good on Hatsun bt qe
Yes it would but Hatsan has funky scope rails so you may not be able to get the picatinny mounts in the exact position you want. If that's the case then you could get dovetail mounts, or cut slots in the rail so it'll accept the pic mounts.
What sunshade extension can I use and still use the flip up lense covers?
With integral ( slanted ) sunshade i have never seen a extension that would fit it.
What rings do I need to use this on an Daystate Air Wolf?
You need high 11mm dovetail mounts for the Daystate .
Where is this scope manufactured?
Yes, China. They don't advertise that but it's printed on the under side of the scope.
Would this be a good choice for my new terrus in .177? Punching paper only. 10 meter out to 25 meters.
I had the compact version on my Terrus. Had it replaced with this one because the eye relief distance was too far for comfortable shooting.
I think it would be a good fit, or maybe the compact version which might look better on the gun. I prefer the compact... Reticle is not ideal as mentioned but thin reticles are usually more $ so you have to draw the line somewhere. I consider the reticle acceptable, especially when at max max mag, which thanks to the side parallax adj is way easier to use than AO.
Tim if you are competition shooting then you may want to go with a model with finer reticle. This unit has rather thick lines and MIL dot more designed for hunting. At 10 and 25 meter shooting try to select a more precise style/thinner reticle.
WILL THIS SCOPE FIT MY FX WILDCAT
The scope itself will, but you'll need to buy dovetail mounts for it unless by chance you have the Picatinny rail. I would get these Leapers Accushot 1" Rings, Medium,... or the taller Leapers Accushot 1" Rings, High,... if you want. They look great, super strong, and can't beat the price.
Hey. I was just wondering if the scope would fit my marauder thanks.
Darian - I have this scope on my .22 MROD Gen2 and it works wonderfully.
Hey. I wanted to use this scope on a Ruger American .22lr. Is this scope good out to about 50-70 Yards. It would be used for squirrel hunting. Thanks.
I have this scope on a .243 rifle and shoot 1" groups at 100 yards. This is a very nice scope.
Yes it is a good choice. I have a big sky sightron 4x16x42mm one my ruger 10/22 LR.
Is this Scope an Etched Reticle?
I have two different TS, maybe three, including this exact one and none have etched. Etched is more expensive but I bet the $ will come down over time and etched will be the norm.
Leapers clearly states the True Strength scopes have an etched reticle. Unless that's a misprint on their discription of the TS scopes?
Usually that is stated under the description tab and since its not i would say it isn't an etched reticle but a wire reticle. They usually cost more.
This question was asked and answered already, but I'd appreciate if someone else would confirm focusing issues at high mag past 50 yards; if yes, is this pretty standard with both this and the 4-16x versions? Thanks in advance! ((Looking for the perfect scope to shoot at 100 yards.is this it? Paul from USA: No @ 12x past 50 yards it loose some of it's ability to focus well.))
Mine seems to focus fine at 100 and beyond, but the reticle wire is kinda thick for that range. So hunting I'd say ok, maybe, but too fat for target imo. Closer airgun ranges work tho. I wish they'd give images or measurements of the reticle at X mag and X range, would be helpful. My redneck estimate is the thinnest part of the wire covers 1/2" at 100yrds at 12x. Assuming generic horse corral tubing is 2", which is what I looked at at it seemed to cover one fourth of the tube.
Excellent scope, a real workhorse takes the recoil and stays zeroed. Mine is clear at all magnifications from 10 yards to infinity. It is a heavy scope. The crosshairs are kind of thick, great for hunting but not the best for target shooting.
For my Hatsan 125 sniper .22 is these scope a good one or is better the Hawk Sport Optics Vantage 4-12x50,Thanks
Either scope is a good choice , if were you i would use the weaver mount option on the sniper , its hard to find a mount that doesn't move on that dovetail.
Is the reticle etched or wire
Not all TS scopes have etched reticles. I know that for a fact because I recently bought a TS scope that has a wire reticle.
See my answer above that Leapers says that all their True Strength scopes have an etched glass reticle.I'm planning on ordering one and I'll be very upset if it's not an etched glass reticle.
Ernest you gave a none answer. Is it a wire or etched reticle?
IF GLASS IT WOULD BE LOUDLY ANNOUNCED
Will this scope fit on an Umarex NXG APX? Does it require other rings; if so provide product number.
It's a bit of an overkill for NXG. Umarex NXG is meant for shooting at 10 yards.
Are the included rings worthwhile or should i buy new rings for the droop comp 11mm to weaver adaptor im gonna have to buy... I already own the scope
Rings are fine. As far as what you need to install it on the rifle - depends on the rifle. It if heas weaver rail, you should be OK. Droop varies from rifle to rifle. Sometimes shimming scope is enough, sometimes it's not and you need an actual droop compensator.
Would this be a good scope to put on a RWS 350 mag. What mount would you recommend? Thanks
I agree with Val except I prefer the medium height version of that same mount, or the medium two-piece version. But yes, I think this scope is kinda sorta made for guns like the 350, or a best attempt at it since I'm not sure any scope can reliably last on the more abusive springers. But excellent choice and the side parallax adj is great.
Yes, this scope will work well with RWS 350. You will need these rings though: Leapers Accushot 1-Pc Mount w/30mm....
It's been about 2 weeks since I posted this question, I guess I should take it as a no
Will this scope handle the recoil from my Walther Falcon Hunter .25 Series? My wife threw away the box, scope and hardware by accident?
yes, it will. The scope has TS (true strengh) rating by Leapers. Here is some article on it: https://www.pyramydair.com/article/They_asked_for_it_Leapers_scopes_July_2005/23 . Walther Falcon Hunter is a beast so you do want an airgun rated scope for it (which this is)
welll a guy put it on his center fire rifle and it work. i have a cheap utg leaper scope and i put it on my bone collector bull whisper and work just fine. the only thing is to buy good mount for it. i had bought 4 cheap scope mounts and my gun shredded the recoil pin.
I see where you use this scope on the Hatsan 125 Sniper.22, so, I'm thinking that this will work on the Hatsan 155 torpedo, I hope I'm right, thanks;
Do the rings that come with this scope work on a gamo whisper fusion?
No the fusion series have 11mm dove tail rails this scope comes with weaver style rings
yes, it does come with weaver rings
Can I use a Leapers Accushot 1-Pc Mount w/30mm... with this scope??
yes you can.
Can I use this scope in my Hatsan 125 Sniper .22 ????
Yes. I have it on my hatsan 125 and love it.
Looking for the perfect scope to shoot at 100 yards.is this it?
No @ 12x past 50 yards it loose some of it's ability to focus well.
I bought this scope, yet to reach me but I want to know if the accessories that brings me to bring it serves sumatra rifle
No, you would want to buy BKL 2-Pc 3/8" or 11mm... as well.
are the rings that come with this scope high enough for the hatsan bt65sb elite
No, I would buy these rings instead: Leapers 30mm Rings, High, 3/8"....
Will this work with a Ruger/Umarex Talon with Picatinny mounts
Will this work for hatsan bt65 elite
Yes it will
I have a Benjamin Marauder, what mounts should I use for this scope?
Can the leapers accushot 1 piece dovetail mount be used with this scope?
Please use part number Leapers Accushot 1-Pc Mount w/30mm... for the rings that you need for this scope.
As long as it's for a 30mm scope tube and medium height.
what rings should I use to mount this scope on a umarex octane
RG2W3154 [UTG Max Strength 30mm Rings,...]
how high are the rings
22 mm saddle height
do you guys think this scope will be over kill for my beeman mach 12.5 .22cal ?
This would be a good scope for that rifle
Is this scope designed for the recoil of a springer air rifle? Not specified on the box or instructions? Thanx
Yes it can handle it.
does this scope have a very thick reticle?? ill be hunting and plinking some spinners and small bulls eyes.
Yes, it's kind of thick. You might want to look at a Hawke.
Does this scope, due to the 44mm objective, REQUIRE A "HIGH" SCOPE RING (I WANT LEAPERS/UTG) (FOR THE NEW BENJAMIN TRAIL NP2), OR CAN I USE A "MEDIUM" RING? IF I NEED THE "HIGH" IT APPEARS THAT MY ONLY CHOICE IN A 30MM MAX. HOLD HIGH IS A QUICK RELEASE, WHICH I DON'T NEED A QUICK RELEASE. I JUST WANT THAT SUCKER TO HOLD WITHOUT VIBRATING BACKWARD ON THAT HI-POWERED, HIGH RECOIL RIFLE. THANKS
You can use a medium, it will be close, but you should be able to use it
Will the UTG 80mm add-on SWAT WHEEL fit on a Leapers 3-12x44 scope ?
Yes and it function very nicely.I have the wheel on two of my field target rifles.
What size are the rings?
The rings are 30mm,weaver style, so I always have to buy 3/8 dovetail extra for my rifles.
Will this work on a 22mag rimfire rifle??
Yes, it will.
How long could you see with the scope?
I think you're asking how far you can see,it's listed to infinity.
can this scope be furnished with dove tail 11 mm rings?
I always have to buy 3/8 dovetail separately to fit my rifles.
What do I need to put this on my Benjamin marauder 25?
It might be a good ideal to ask this question over the Marauder rifle Q&A section. And ask what style rings you're going to need to fit this scope.