Why are the fps and loudness higher on the .22 EscapeSS than the TalonSS? Appears to have the same barrel length and shroud, only differing in tank capacity. Thanks
The escape has a striker weight and a high flow valve I believe
Is this rifle regulated because I did not see anything saying so, maybe I missed it, so what pressure is it regulated at? Or, if not regulated, does anyone know the valve dwell time on the first shot at 3,000 psi for the maximum power for the five shots.
The AirForce line is not regulated. The dwell time question would be better posed to AirForce, don't think Pyramyd has a way to accurately measure that right now.
I got it that the 0.25 caliber shoots at 900 fps, but what is the weight of that pellet that travels at 900 fps?
Having an adjustable hammer spring tension means you'll be able to push a few pellets that fast, but out of the box 900 fps should be achievable with anything in the 25 grain range or less.
Can the bigger air tank put on this one for more shots?
Yes a condor tank can be used for more shots.
in the .25 what are average velocities with jsb?
In .25 cal, is this essentially a Talon-P "SS" if I removed the stock?
Escape .25 shoots up to 900fps the Talon SS up to 665fps.
Yes same design as the talon-p thats shrouded and silenced ( smaller tank).
Yes, you could call it that.
How will this gun do with mr hollow points 50 grain ? Figure on high still get at least 900 fps?
We have not tested this air gun with that pellet but I would suspect it to be under 900fps.
If i buy the .22 ss version can i later install a 24'' barrel in .25? I know that it will not be silenced, just for hunting.
Yes you can.