Can anyone recommend a shroud/ moderator for the 24 inch barrel? Does anyone do a shroud that has similar look and finish as the 18 inch SS or would my only option be a moderator tha attaches to end of the barrel after being threaded?
I could say but it probably wouldn't be posted . You could check the forums?
I have a .25 Escape. What is the bore size. Trying to find what size pellet outside o the Eunjin can be purchased or cast.
How would the sound level of this rifle compare to a traditional 22 cal long rifle cartridge?
It depends on the person your asking? Everyone has there opinion. I would say just as loud.
It is two weeks I am buy the gun (air Force escape). They worked well for that period. Now when I fill the tank more than 1500 psi. When the first burst the whole air comes out of the tank
what fill adapter can i use
For which pump ? Most pumps come with female quick disconnect that hook right up to the spin-loc male fitting . So you wouldn't need an adapter in that case .
i have a Benjamin hand pump can i use it to fill the tank on this rifle?
It should work i believe the pump has a female quick disconnect.
Could you tell me if the air tank Condon left for this rifle ..? Higher capacity tank that recommend ..? Thank you so much
The bigger condor tank will fit , it uses the same basic design.
both the escape in .25 and the escape UL in .25 are rated with 43 grain pellets the same speed but there is a 6 inch difference in barrel length is this a correct velocity for both?
can this rifle accept the flash suppressor
Yes the barrel can threaded at the time of order , P.A. can do.
Whats outer diameter (mm) the barrel ..?
Can someone post a instructional video on how to change the barrel to a different caliber.
Mine came with a dvd instructional video that shows how to change barrels , its very easy. There are also you tube videos showing how this is done.
Hey, you can place a Sound-Loc Kit AirForce Talon SS? Thanks for your kind reply...
Yes a Sound-Loc Kit can be installed on a Talon SS but if the barrel your using is longer than the shroud it will no longer be suppressed . I installed a 24 inch barrel on my Talon SS and it is not quiet any more.
What is the max velocity one the gun with Eunjin 35 grain pellet with the 25 caliber.
In the description it states a 43.20 grain pellet travels at 1010F.P.S. so 35 grain pellet would probably in the range of high 1200 fps to low 1300fps. Lighter pellet more fps.
Does it have a threaded barrel
Just where the allen set screws install into the bushings at four locations. You remove these to change barrels and or calibers.The barrels themselves are not threaded anywhere else.
Can I get 100fpe out of the escape with 50gr cast bullets?
Im sure it could get close to that?
can a air compressor be used to fill this gun ?
It would have to be high pressure compressor regular compressors can't reach the 3000 psi needed to fill this gun. Or a high pressure pump looks like a bicycle pump but it can easily fill a PCP gun.
Does it comes with a scope?
No it doesn't.
Can you use a bicycle pump to refill the bottle?
No, you need an HPA pump. For example this pump AirForce PCP Hand Pump, for...
How fast will it shoot while shooting cross man 14.3 22. Caliber?
900 plus F.P.S.
Do have to buy the air tank with it or does it come with the rifle?
It comes with the tank.
Will the air venturi g4 hand pump work will this?
Yes. Both Air Venturi G4 and G6 pumps will work it. Click PCP Hookup tab and see if you need any adapters.
Can I get 80fpe with 32gr eunjin?
What kinda power can I get with 22cal eunjin 32gr pellets on max power?
Should be around 80-85 FPE
Are larger air tanks available for the escape from pyramyd
You can use the condor rifle tank ( same design)?
I went ahead and ordered my first air force can't find trigger pull weight?
Thanks for the reply I ordered it already looking to get second larger tank is the tank regulated if so what psi looking at Mac tunes tanks to order but don't know what reg pressure to order don't want to loose velocity as I'm planning on using 50 grains hollow points
You would need to contact the retailer of that item as I do not have any specs for their products.
How will this gun do with mr hollow point 50 grain still above 900 fps?
We have not tested this model with that projectile but I suspect it would be near 900fps.
can you put a bigger tank on it ???
Yes it is the same basic frame as the highly popular Talon / Condor it just has the Talon-P tank included.
All airforce tanks will fit ,, it is the same frame as the other airforce products.
Hello! is it possible to send to Russia ? and how much will it cost ?
No, Pyramyd can't ship anything to Russia that shoots.
How many pump does it take to fill up air force escape tank
The small tank takes roughly 135 to 140 pumps to fill from empty or 9 pumps per shot @ 15 shot capacity. The trick is not to let it get empty. I fill mine after each outing or carry a spare tank if needed. You could also install a condor tank to. It will fit.
Its a fairly small tank so im sure no more than a standard PCP under barrel tank
is it possible to fit the 500cc condor tank
Is this accurate in 100 yrds?.
Condor tank will fit to escape frame
This the same basic frame , switched my full size condor tank over fits just fine.The only thing that is different is the barrel shroud length.Its a talon-p with a 24 inch barrel.
The larger tank will not fit Escape frame.