Date: 26/11/2020 4:57
0

Customers Q&A on Air Arms S510 XS Ultimate Sporter Xtra FAC, Walnut

Got a question? Got an answer?
Log in, then enter your text.

  • Jose from USA asked:

    Do you sell the moderator for this gun?

    • Mark from USA:

      Pyramyd Air does not sell separate moderators. There are aftermarket moderators available for the AA S510 XS.

  • Robert from USA asked:

    Is the barrel threaded on the walnut stocked model so a moderator can be attached? What would you rate the noise level to be on a 1 to 10 scale with out a moderator ,with #1 being very quiet and 10 being very loud

    • Mark from USA:

      The barrel is threaded 1/2 x 20. The sound level would be a 5 out of 10 without a moderator.

  • Robert from USA asked:

    Is the fill cylinder fixed or can you remove it when empty and insert another re charged replacement cylinder?

    • Mark from USA:

      The air cylinder is fixed on the gun.

  • Richard from USA asked:

    Do you need a female thread foster fitting to attach to Air Arms weird fill fitting .I have nomad 2 with female quick connect and mark 4 hill pump set up same way?

  • stephen from Canada asked:

    is there a bipod available to fit in the rail not using the sling stud? What is this kind of rail called?

    • Francisco from USA asked:

      Will the moderator model come with a Walnut Stock?

      • Mark from USA:

        The moderator version is only available in the laminated stock.

    • Gerald from USA asked:

      in 25cal it says 44fpe & only 815 fps which is about 35/36 fpe with a 25g pellet..is this a misprint? or heavier pellet? can the regulator be turned up 4 more power

      • Tyler from USA:

        Heavier pellet.

    • Thomas from USA asked:

      Does anyone know who makes the regulator in this rifle? Also, what pressure is the regulator set for?

      • Mark from USA:

        The gun comes from the factory with a regulator installed. Reg set 150 bar.

    • Thomas from USA asked:

      Does anyone know who is making the regulator in this rifle and what pressure (bar) it's regulated at.?

      • Mark from USA:

        The S510 XS comes with a regulator installed at the factory.

    • Greg from USA asked:

      Are there any plans to expand the regulated, precision action to any other S510 Xtra FAC rifles in their inventory?

      • Tyler from USA:

        We shall find out soon. But I have heard that is the plan.

    • David from USA asked:

      Specs indicate 60 shots. Is this 60 shot per fill or 60 shots in the optimum power range at 20fps? My interest is using this for Hunter Field Target matches.

      • Tyler from USA:

        That's 60 shots on the reg.

    • Stephen from USA asked:

      I see they say the they are "British Designed" but what country are they actually manufactured and assembled in?

      • Tyler from USA:

        They are made in the UK outside of the LW barrel which comes from Germany and the stock which is Italian made.

    • marc from USA asked:

      does this gun have a threaded end for optional aftermarket moderator?

      • Tyler from USA:

        The end of the shroud is threaded. 1/2x20 male

    • Thomas from USA asked:

      Can you give a couple of good FFP scope recommendations in the sub $400 range for this gun? This question if for Tyler. Tx, Tom

    • Gerald from USA asked:

      55/60 fpe would have been nice,companies should make a hunting version & bench rest/competition version..is there a way to tune 4 more power.? or will that power adjuster on max give it at least 50 fpe...these have to be the most beautiful guns on the market..daystates are just as beautiful

      • Tyler from USA:

        Of course, but it will probably require some serious internal modification. Since we haven't seen one yet, we will have to wait and see what the .25 is capable of. Air Arms may be being conservative in their energy assessment. We shall see. I'm just glad they are now in the same ballpark as many of the other big .25 caliber rifles out there. The old S510s only produce around 35-36 FPE in .25

    • Poncho from USA asked:

      Primero pido disculpas, el ingles no es mi lengua materna, el rifle tiene una longuitud total de 44.74" y un barril de 15.5", es esto correcto, porque me parece que el barril esta corto, para la longuitud total del rifle

      • Tyler from USA:

        Those specs were provided by Air Arms directly

    • Fred from USA asked:

      I am very interested in this rifle. Will Tyler Patner be doing a review of this rifle soon?

      • Fred from USA:

        Thank you!

      • Tyler from USA:

        Once there is one in the states, you bet.

    Navigation