I like this gun very much. Could you tell me the exact length of the barrel inside the shrouded barrel?
Per specs 15.39 inches .
What's the difference between the regular synthetic version of this gun and the Limited Edition?
The barrel is longer on the limited edition
How do you adjust the power?
There is a hammer spring adjustment in the rear of the action that can be tightened or loosened to adjust the power.
About cal .177 ??? when is coming
No ETA on a .177 at this time
I'm in Colorado--What company here makes LDC's/moderator's?
Not familiar with anyone making them for the Ataman's although I'm sure someone has. Might check the Yellow or GTA forums
Does the muzzle end of the barrel on this air rifle have 1/2" UNF thread?
I am unable to find my calipers but it appears to be 15mm unknown pitch, with male threading required on LDC.
It is NOT 1/2" UNF. It is non standard metric threads.which requires male thread on the LDC
Wondering if Huggett Belita Silencer 1/2 '' UNF will fit this gun ?
buy moderater for ataman from company in colorodo 80bucks
Not without some type of adapter or custom threaded end cap.
What is the noise level?
Out of the box - it is quieter than an AA S510, HW100, and Daystate Regal. Quiet enough for decent size backyard. With addtl hadware - silent except for small mechanical noise. It is only putting out 26-28 FPE.
Frist off am a huge P/A fan but think you have bumped your head on the mag cost, Big Question are you going to lower the cost of the magazines 108.00 puts this entry into the US market at over 1800.00 with 3 extra mags ,pretty steep mag cost puts this offering clearly more expensive than other proven bullpups
I agree it is a bit overpriced for the magazine. I can tell you it is the highest quality, most precise, no slop, and all metal. Incredibly precise fit and alignment when loaded. of the 11 pcps i own, i can say that this mag is the most precise with no movement once loaded with reliable index.
I cannot speak to the cost of the magazines but one of the nice features (if it makes a difference to you) is that you can actually reload the mag while it's on the rifle. Carrying a small pouch of pellets would eliminate the need for extra mags. Just something to consider.
Hello, can a Magpul stock be adopted to this rifle along with a cheek riser?? Thanks Dan
The OEM stock is very high quality but it does not appear to be mil spec or comm spec for m4/16 type stocks.
The sample we had didn't appear to be changeable but we will have to see what the production versions look like as it might be a possibility.
Is the Air Venturi G6 pump capable of fully charging this gun?
The G6 can fill to the 4350 psi max pressure but that would be quite a challenge physically.
Will this gun still fire appropriately if filled to 200 bar vs 300 bar?
Stated in another way - mine is using about 30 bar per 10 shot magazine.
Based upon my shot strings - you would get between 20 to 25 shots on the reg from a 200 bar fill. Mine is shooting 27fpe with JSB 15.89. 40 shots on reg from 260 bar fill. Reg seems to be set somewhere in neighborhood of 125-130 bar.
Yes, you will just be getting less full power shots on the regulator.
M2R Carbine ultra compact will it be available in .25cal or 9mm Thanks John
I agree not conducive platform for larger than .22. It would make an incredible 20 fpe .177
The platform is not conducive to the larger calibers. The shot count is too low and to maintain a reasonable shot count, the power would have to be scaled back too much.
Will it be available in .25cal or 9mm? Thanks cugo18
Not at this time
Will this be available in big-bore/.357 or 9mm? Thank you, AGW.
Sadly no. The platform does not lend itself well to the larger calibers. The shorter barrel and air cylinder really make getting a decent power and reasonable shot count impossible.