Does the gun come with the tool you need to tighten the co2.
There is no tool. There is a screw with a thumb wheel on the bottom of the grip frame
The BBs are not coming out of my pistol after putting in a new cartridge. Can CO2 cartridges go bad if they are old but never used?
It's possible. You can test if the CO2 is pierced by removing the magazine and pulling the trigger. If the gun just goes "click" and you don't get any CO2 through the gun, you'll need to try a new cartridge
i've got the c11 and the clip is stuck and you can here the bb's rattling around but the clip won't eject. this was the first time i used it.i hope there is a quick fix thanks wayne
I was told by Crosman to take a flat blade screwdriver and place it between the mag and grip the seam of the grip will open and loosen the mag and bb's will fall out, but do gently, this worked for me
I get one shot off then the bb's over-flow. what can II do
What is the absolute best ammo to use in a CO2 pistol
I use the bb's they tested my gun with Daisy Precision Max zinc plated 2400ct, pellets RWS Diablo Basic .177, 7 gr.
Would it hurt if you got shot with this gun
Yes it breaks the skin yes it is a gun yes it is a weapon not to be hunting with it's not powerful enough to be humane if you try to hunt with it. I suggest you take some kind of fire arm safety training course
It should never be used to shoot anything live. This is not a toy and cause serious injury.
Yes it would sting and maybe put out an eye.
Is it a blowback gun?
Does this come with bb pellets
is this made of all metal? what does blow back mean?which is better blowback or repeater?
No, the C11 is mostly plastic. Blow back refers to the slide moving backward when the shot is fired to simulate the recoil of a real firearm. A repeater generally just refers to a gun that is magazine fed.
I want to get the Crossman C11, the remanufactured one, but it sais gun only. Does that mean that it doesnt come with the clip?
It would come with 1 mag.